[laso]

I have a problem after changing the IKHA3 module. The retrofit meows just for the look as the early car had 2 zone air conditioning. It was just about changing HVEC. I replaced the panel and the driver, I connected CAN to 10 and 11 pin in 10B. Then I changed the SVT and entered into VCM. Unfortunately, I still have no connection to IKHA3. FEM raised to Ilevel 22-11 and changed type and production date.

[Node]

I don't understand what you are doing, but just from pictures - WHY your HWEL is 16EE??? That is CAFDs number!!! HWEL should be 16EF!!!

[laso]

I don't understand what you are doing, but just from pictures - WHY your HWEL is 16EE??? That is CAFDs number!!! HWEL should be 16EF!!!

In F30 from 2013, I want to change the panel to LCI (white color). I replaced the panel and the controller. Then I changed the svt but still no connection.

[Siki78]

Try this… Read ecu then vo code one module but before coding tick in esys settings write svt to vcm after tal calculation. Then go to coding tab and read ecu again. If this not help then write manually and vo code ihka. Like node already said you have mistake in hwel

[laso]

Thanks Node and Siki 78. I changed it to 16 EF but still couldn't encode it. Siki78 your way worked. Thank you