Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Golf Mk5 - Cluster Swap - SOLVED
06-02-2023, 18:31 PM,
Post: #1
|
|||
|
|||
Golf Mk5 - Cluster Swap - SOLVED
Hello everyone,
I want to swap cluster on old Golf Mk5 My2004, but I'm fast with VCDS procedure. I can't get it work Old cluster: 1K0920850K VDO from2004 (Have PIN, tested to logon) New cluster: 1K0920870K VDO from2004 (Have PIN, tested to logon) Procedure: 0. Installed donor cluster into car 1. Login to module 25-Immobilizer with PIN from donor cluster (OK) 2. Read channel 050 in adaption and wait 5 minutes until "Immobilizer Adaptation active" is changed to "Immobilizer active" otherwise I can't get "Immobilizer Adaptation active" message. 3. Read channel 050 again and enter PIN from old (original) cluster, getting answer "Pin ?" or "System Not OK" after Test. IMMO turn off for 2-3 seconds and activates again. 4. Try to Save and switch OFF the ignition and let the car sit for ~1 minute, but without success Any idea what I'm doing wrong ? ----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
06-02-2023, 18:48 PM,
Post: #2
|
|||
|
|||
RE: Golf Mk5 - Cluster Swap - HELP - What is procedure ?
Here immo4 is used, it is not possible to customize only with PIN as on generation immo2,3.
Need to transfer immodata using a suitable tool via OBD. VAG solutions
|
|||
06-02-2023, 18:51 PM,
Post: #3
|
|||
|
|||
RE: Golf Mk5 - Cluster Swap - HELP - What is procedure ?
(06-02-2023, 18:48 PM)jokir Wrote: Here immo4 is used, it is not possible to customize only with PIN as on generation immo2,3. Thank you. Will be work with ODIS GFF + online ? ----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
06-02-2023, 19:18 PM,
Post: #4
|
|||
|
|||
RE: Golf Mk5 - Cluster Swap - HELP - What is procedure ?
Try with another key in ignition if you have more than one.
evgeny87
|
|||
06-02-2023, 19:36 PM,
Post: #5
|
|||
|
|||
RE: Golf Mk5 - Cluster Swap - HELP - What is procedure ?
or maybe switch immo off in cluster ?
|
|||
06-02-2023, 19:49 PM,
(This post was last modified: 06-02-2023, 19:51 PM by spooky75.)
Post: #6
|
|||
|
|||
RE: Golf Mk5 - Cluster Swap - HELP - What is procedure ?
(06-02-2023, 19:18 PM)evg_eni Wrote: Try with another key in ignition if you have more than one. Have two keys and tested with both. Same result. (06-02-2023, 19:36 PM)al70 Wrote: or maybe switch immo off in cluster ? Don't have tool and knowledge for that. ----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
06-02-2023, 20:08 PM,
Post: #7
|
|||
|
|||
RE: Golf Mk5 - Cluster Swap - HELP - What is procedure ?
Are you checked meas blocks in 25 groups 1,2,3. Clear dtc's in engine if you have. In immo 3 this error (system not ok) sometimes is is solved by reset cluster with channell 00 before go to 50th. But i am not sure if here 00 is available.
evgeny87
|
|||
06-02-2023, 20:18 PM,
Post: #8
|
|||
|
|||
RE: Golf Mk5 - Cluster Swap - HELP - What is procedure ?
i switched immo off in golf 5 tdi ecu but in cluster i had immo active and safe so i removed the cluster and read the eeprom, now heres where i got stuck, a member here jumped onto my laptop through teamview and modified the dump with carprog, i honestly don't know the procedure but i think it is explained on codecard site, dash was perfect after that
|
|||
06-02-2023, 21:08 PM,
(This post was last modified: 06-02-2023, 21:11 PM by spooky75.)
Post: #9
|
|||
|
|||
RE: Golf Mk5 - Cluster Swap - HELP - What is procedure ?
(06-02-2023, 20:08 PM)evg_eni Wrote: Are you checked meas blocks in 25 groups 1,2,3. Clear dtc's in engine if you have. In immo 3 this error (system not ok) sometimes is is solved by reset cluster with channell 00 before go to 50th. But i am not sure if here 00 is available. Don't have DTC on engine. Tested to reset cluster (17) and immo (25) on channel 00 before channel 050 on immo, still "System not OK". (06-02-2023, 20:18 PM)al70 Wrote: i switched immo off in golf 5 tdi ecu but in cluster i had immo active and safe so i removed the cluster and read the eeprom, now heres where i got stuck, a member here jumped onto my laptop through teamview and modified the dump with carprog, i honestly don't know the procedure but i think it is explained on codecard site, dash was perfect after that I'm not sure that I want IMMO off, I will keep old cluster if I can't swap it with VCDS or ODIS. ----------------------------------------------------------------------
If I helped, please Press "Thanks" and "Reputation" ---------------------------------------------------------------------- |
|||
07-02-2023, 07:56 AM,
Post: #10
|
|||
|
|||
RE: Golf Mk5 - Cluster Swap - HELP - What is procedure ?
(06-02-2023, 21:08 PM) spooky75 Wrote: still "System not OK". Is that ecu software touched by someone? I dont have more ideas, swap immo, for these clusters is very easy. Even working key is not required. evgeny87
|
|||
Reputation: +1 - al70 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
6 Guest(s)
6 Guest(s)
Return to TopReturn to Content