Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT: How to remove old FSC?
09-11-2018, 21:55 PM,
Post: #11
|
|||
|
|||
RE: NBT: How to remove old FSC?
(09-11-2018, 19:30 PM)masa52 Wrote: what kind of BIN file to order? Right so I take you dont have a Professional headunit but either Nav+ or so? |
|||
10-11-2018, 05:29 AM,
Post: #12
|
|||
|
|||
RE: NBT: How to remove old FSC?
professional EVO in G11
|
|||
11-11-2018, 22:22 PM,
Post: #13
|
|||
|
|||
RE: NBT: How to remove old FSC?
if your update is 11-2018 istep, ... you can no longer apply patches with usb .bin files
the solution is the downgrade, .. but I have not yet tested the operation with last istep. BMW TECHNICAL SERVICE INFORMATION - ITALY <> Full map update download all the world BMW FSC RETROFIT complete set: CIC / NBT / NBTevo id4/5/6 (Carplay included) - NBTevo VIM Map code Premium - Motion - Move - Route - Next - Evo ID4 |
|||
12-11-2018, 10:12 AM,
Post: #14
|
|||
|
|||
RE: NBT: How to remove old FSC?
I know that patch been blocked
my question is how to delete patched fsc and load factory repair fsc?? |
|||
12-11-2018, 10:57 AM,
Post: #15
|
|||
|
|||
RE: NBT: How to remove old FSC?
|
|||
12-11-2018, 11:44 AM,
Post: #16
|
|||
|
|||
RE: NBT: How to remove old FSC?
could you be more specific which parametr need to be picked
|
|||
12-11-2018, 16:05 PM,
(This post was last modified: 12-11-2018, 16:06 PM by Wibbles.)
Post: #17
|
|||
|
|||
RE: NBT: How to remove old FSC?
You need to run HU_SPECIAL_NBTEVO_CLEAR_V850 from DEV_UDS.prg tools in Tool32, reboot then you can clear the FSC using the STEUERN_DELETE_PERSISTANCY_INTEL_PLUS_SWT in the NBTEVO.prg job set in Tool32.
The unit will be flattened back to a low level of software and can be flashed with any level of firmware. |
|||
Reputation: +2 - hitit [+1] , outubro [+1] | |||
09-02-2019, 18:48 PM,
(This post was last modified: 12-02-2019, 09:14 AM by ZAV.)
Post: #18
|
|||
|
|||
RE: NBT: How to remove old FSC?
(12-11-2018, 16:05 PM)Wibbles Wrote: You need to run HU_SPECIAL_NBTEVO_CLEAR_V850 from DEV_UDS.prg tools in Tool32, reboot then you can clear the FSC using the STEUERN_DELETE_PERSISTANCY_INTEL_PLUS_SWT in the NBTEVO.prg job set in Tool32.Delete please |
|||
Reputation: +1 - LeonidLunin [+1] | |||
22-07-2023, 11:03 AM,
Post: #19
|
|||
|
|||
RE: NBT: How to remove old FSC?
I have Evo Id4 with software id5/id6 and with HUtool FSC patch. How I can remove FSC patch?
I have only Huengienering. Will wiping the V850 remove the FSC patch? !!!MGU Virgin and Custom FSC!!!
EVO ENTRYNA2 FSC Remote 8HP Reset Kafas 4 Virgin If I help press rep and THX |
|||
22-07-2023, 12:22 PM,
Post: #20
|
|||
|
|||
RE: NBT: How to remove old FSC?
Flash can remove the patch
|
|||
Reputation: +1 - laso [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content