Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ RNS-510 stuck in boot logo and reset
18-09-2023, 09:48 AM,
Post: #1
|
|||
|
|||
RNS-510 stuck in boot logo and reset
Hi everyone,
My father's car has an issue. When the HU starts, remains in logo 'Welcome to Volkswagen' and resets itself after 2 minutes and again in the loop until is finally starting up. Where the issue is and what can I do? firmware update? How? What do I need to do/download and the procedure of updating the firmware. hopefully I don't need VCDS or something for a firmware update. Attached are some of the pictures with version history log from when once started up |
|||
18-09-2023, 10:05 AM,
Post: #2
|
|||
|
|||
RE: RNS-510 stuck in boot logo and reset
Hi, yes you must try flash firmware (download version for HW C14), burn iso on CD, reset radio ( combination button on photo ) next put CD with firmware...
When you have any problem with flashing write here, sometims this unit have problem with PCB or SSD Disk, I try help you. Regards! |