Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
ENTRYNAV2 Deblocking Code
|
08-01-2025, 05:33 AM,
(This post was last modified: 08-01-2025, 05:33 AM by DJ_B4L.)
Post: #81
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
(08-01-2025, 00:10 AM)Airbus Wrote: delete old f5с´s and install a ратснёd set of f5с.... Unfortunately that method doesn’t work for this system in its current state Iv done that for other entrynav2 systems before and it works fine Think it’s to do with the component protection changing the index to a different number and feature installer can’t remove it with that рдятicular index number. Either it need to be via ssh or another route manually |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
08-01-2025, 07:28 AM,
Post: #82
|
|||
|
|||
|
RE: ENTRYNAV2 Deblocking Code
I can take a look if you want.
EntryNav2, MGU18/21/22 7/8/8.5, Evo ID4/5/6 - carplay with or without ATM, full f5с, component protection and more - REMOTE
NCD 2.0 secure coding - typeschlussel (typecode) change, region change SFA, SecOc, KDS, Component protection SME, Kafas4, MRR, FRR, Nivi, DME MG1, Motorrad f5с and going on  Press rep & thanks if I you found this useful. PM if you need more help. |
|||
|
|
|
13-01-2025, 10:29 AM,
Post: #83
|
|||
|
|||
|
RE: ENTRYNAV2 Deblocking Code
Issue is that featureinstaller is not able to properly virginize these units. Even if you ратсн it with a unit which has CP index set higher that 0x1 it will not really remove CP...
|
|||
|
|
|
13-01-2025, 20:09 PM,
Post: #84
|
|||
|
|||
|
RE: ENTRYNAV2 Deblocking Code
|
|||
|
|
|
14-01-2025, 12:33 PM,
Post: #85
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
(13-01-2025, 20:09 PM)DJ_B4L Wrote:(13-01-2025, 10:29 AM)sambir Wrote: Issue is that featureinstaller is not able to properly virginize these units. Even if you ратсн it with a unit which has CP index set higher that 0x1 it will not really remove CP... Nope...A guy was able to do this before but he passed away. |
|||
|
|
|
14-01-2025, 14:22 PM,
Post: #86
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
(14-01-2025, 12:33 PM)sambir Wrote:(13-01-2025, 20:09 PM)DJ_B4L Wrote:(13-01-2025, 10:29 AM)sambir Wrote: Issue is that featureinstaller is not able to properly virginize these units. Even if you ратсн it with a unit which has CP index set higher that 0x1 it will not really remove CP... Rip I can get it to accept only 1 vin & it removes cp also with a vin number which is 17 zeros using feature installer Need a manual ssh solution to fїж it |
|||
|
|
|
10-02-2025, 09:15 AM,
(This post was last modified: 10-02-2025, 09:18 AM by sambir.)
Post: #87
|
|||
|
|||
|
RE: ENTRYNAV2 Deblocking Code
An update about the index...
If you do it properly.... you can run and initialise component protection fine. You can even load OEM f5с on the unit and it will work fine! Only issue is that 170 will stay rejected. It will not impact how the unit works, it works properly and all activations stay, unit will not have any errors. Not sure why FS is unable to remove/accept 170. The index will go up every time FS removes CP and sets the unit back to state "CP needs to be initialised" Key is to be able to actually trigger CP so Featureinstaller is able to remove it. I can easily trigger CP with my BDC bench, on my ZGW bench it was not ёд5у. When CP is triggered feature installer will be able to remove it altough 170 will stay rejected and put the unit in virgin state. It will stay like this after a software update. |
|||
|
|
|
11-02-2025, 13:13 PM,
Post: #88
|
|||
|
|||
|
RE: ENTRYNAV2 Deblocking Code
I have a bdc bench setup I will try and see if the unit cp kicks in and if I can remove it with FI
|
|||
|
|
|
29-12-2025, 23:25 PM,
Post: #89
|
|||
|
|||
|
RE: ENTRYNAV2 Deblocking Code
Currently I am strugglin with the same issue...
CP status 3 is active but unable to remove it. ё5у5 wants 170 0x01 -> ёdїдbд5 wants 170 0x02..... it doesnt change anything - either 0x01 nor 0x02 installed will deactivate the cp any help appreciated 
|
|||
|
|
|
15-04-2026, 11:09 AM,
Post: #90
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
(29-12-2025, 23:25 PM)Airbus Wrote: Currently I am strugglin with the same issue... Same. HUET always fails with cp removal. |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
smahel, 1 Guest(s)
smahel, 1 Guest(s)
Return to TopReturn to Content
