[domelec]

Why not just rename your lib file to the serial of the bin then see what you have activated still
(if you have a v8 lib file)

edit:

just looked at some lib files and theres differences in them so you could do with the proper lib file for this serial

but if you have a similar serial you might be ok just changing that
the 150428CAR00542UA.lib isnt the same as this 1

hi i know that the lib file are not the same & they must much with the bin file of the MCU.this is why i ask my question.

here another way: i have the folloing firmware:150428CAR00568KW.BIN
& the lib file:150428CAR00542UA.LIB
i ask if there's a way to use them in updating my carprog to v8.21
regards

options are ........
1: change serial in bin to match lib file and test
2: change lib file to same number as bin file then test (easiest option)
choice is yours

---

Hi need key

name : mbengkel
65A46-D0829-E9006-A9A08


thanks

AHN9MECCRS8LPARYS362HG78BCM8K7X3TBRBP47957KATDL4QUKDRR5X6FN3QHFPD5

---

The lib file for this should be 150428CAR00568KW.lib

hi,what happened if we change the SN in the bin file to have
a dump wich goes with 150428CAR00542UA.lib that we have???

also forgot to say the bin for this 150428CAR00542UA.lib is not the same as the bin for 150428CAR00568KW.lib