[Willail]

Well tacho2008 works i know that and half of mexico, india and other countries where that tool is still used and held in high regard. i would use it myself all the time but other stuff is closer in reach.

Carprog clone many members can say it will work have to tweak it ,and read the manuals really only for mcu usage. I have retooled and remade many of my own adapters , also changed bridges , caps , oclis crystal etc on mainboard also flashed to 4.74 firm . all the N/a are gone and eprom and mcu reading is great no faults. also fixed ground plane and insulated board from aluminum case with k tape. its working fine now but has a nice coat of dust on it , i just brought original so lets see all the faults i find with this one...................cheers

Hello,
Do you have already reworked clone carprog V7.28?
Thanks

---

First and most important of all is to change 74HC125D to 74HCT125M on your carparog, i have good clone (good pcb) but still did not read some I2C,95 ,MCU. I bought 74HCT125M at farnell change all 4 of them and it is ok now. reading without problems.

Hello,

What's a good pcb of carprog? COuld you send me a picture?
Yhanks