Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
|
22-08-2026, 16:22 PM,
Post: #1
|
|||
|
|||
|
BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
Hello, im struggling with my M340i 20'. Want make it sounds better without циLoск. Can someone share solution what options should i use exacly like on m2cs thread? I found couple of threads but no one cant answer my questions. If somebody can share it i can try flashing by myself and give here review.
Regards 
|
|||
|
|
23-08-2026, 21:21 PM,
Post: #2
|
|||
|
|||
|
RE: BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
Have you try to remove 1DF,add 1DE,builtdate 03/19 and check if swfk change?….DME
|
|||
|
|
|
25-08-2026, 08:14 AM,
Post: #3
|
|||
|
|||
|
RE: BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
[quote="Rychta" pid='825633' dateline='1787415749']
Ciao, ho problemi con il mio M340i 20'. Vorrei migliorarne il suono senza usare il циLoск. Qualcuno può condividere una soluzione, indicandomi esattamente quali opzioni dovrei usare, come nel thread sull'm2cs? Ho trovato un paio di discussioni, ma nessuno è riuscito a rispondere alle mie domande. Se qualcuno potesse condividere la soluzione, potrei provare a flashare il tutto da solo e poi lasciare un feedback qui. Saluti [/citazione] If you car have 48V not possible to write software with burbles... Italia
- Remote coding/Programming - BMW MINI E, F, G, U - Secure Coding NCD 2.0, SFA, SecOC, ECU CBB Validation - (E,F,G) 7DCT - DKG - 8HP - 6HP - EGS7 - DKG ISN Reset - REMOTE ратсн MGU + CP remove - BMW Mini UPDATE iD4 to iD6 fїж + Carplay Activation - ратсн CIC, NBT, Evo iD4 iD5 iD6 EntryNav2 (EnavEvo) + f5с SET - EGS Alpina Flash Tune Remote (ENET) - KAFAS4 Virgin Remote (ENET) - ISN MG1/MD1 WRITE via OBD (ENET) - Remote tuning EDC17 and 8HP EGS BMW/MINI Fxx - M2/M3/M4 GXX Vmax OFF - Remote START - PACK CS/Competition - Flash M2/M3/M4 CS, CSL o GTS F8x G8x - Flash remoto Alpina EGS 8HP F e G - Downgrade bootlоаdёя BTLD-000048DB 001.036/37.001 a 001.035.005 - Disable ELV CAS3, 3+ e altro ancora… |
|||
|
|
|
25-08-2026, 14:58 PM,
Post: #4
|
|||
|
|||
|
RE: BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
Thanks for reply, I didn’t tried it yet. I’m new in this.
|
|||
|
|
|
26-08-2026, 03:13 AM,
Post: #5
|
|||
|
|||
|
RE: BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
If it's a 2020 M340i, doesn't it have ID7 installed? If so, you can implement popcorn and bubbles by flashing the DME firmware.
Wasn't that what you were talking about? Did I misunderstand? |
|||
|
|
07-09-2026, 17:25 PM,
Post: #6
|
|||
|
|||
|
RE: BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
I´ve flashed successfully B58 engine with software from Supra, higher power and burbles.
|
|||
|
|
|
07-09-2026, 17:41 PM,
Post: #7
|
|||
|
|||
|
RE: BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
|
|||
|
|
|
07-09-2026, 17:46 PM,
(This post was last modified: 07-09-2026, 17:47 PM by mr_nitroz.)
Post: #8
|
|||
|
|||
|
RE: BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
I´ve paid for a solution to one guy but I was not happy with the result so I´ve looked on kiswb.info for SW alternatives for a current DME HW version and tried them almost one by one. Car was G42 M240i.
|
|||
|
|
|
07-09-2026, 19:13 PM,
Post: #9
|
|||
|
|||
|
RE: BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
|
|||
|
|
|
08-09-2026, 05:50 AM,
Post: #10
|
|||
|
|||
|
RE: BMW G-series 20i, 30i (B48/B46) or 40i (B58) - burbles/pop&bang flash without циLoск
Don’t know, client was not complaining.
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
