[sameur10]

That's exactly what i did with my id4. I've updated it to id5 but it still don't work with settings for APIX1
CID_COLOR_DEPTH 18
CID_COM_MODE spi
CID_RESOLUTION 1280 x 480
If there is sign NO SIGNAL should I use step up voltage to 8,7V?

the screen you have is nativ apix2 , you cant use it now on id4 updated to id5/6 you need a real screen apix1 not 2

[kris_s]

apx1 display needs 8.7v
apx2 display needs 12v

Ok, so there is no chance to use it with my updated id4?
But if i come back from updated id5 to native id4 will it work?

[sameur10]

apx1 display needs 8.7v
apx2 display needs 12v

Ok, so there is no chance to use it with my updated id4?
But if i come back from updated id5 to native id4 will it work?

Yes if you downgrade it back to id4 and code it for apix2 it will work fine , with id5 now code it to apix1,spi and try to restart sevral times hu ,in one of restart it will start the screen working normaly but when it shutdown it will not work again need to do sevral reboots again till get it working but it is not a SOLUTION

[kris_s]

apx1 display needs 8.7v
apx2 display needs 12v

Ok, so there is no chance to use it with my updated id4?
But if i come back from updated id5 to native id4 will it work?

Yes if you downgrade it back to id4 and code it for apix2 it will work fine , with id5 now code it to apix1,spi and try to restart sevral times hu ,in one of restart it will start the screen working normaly but when it shutdown it will not work again need to do sevral reboots again till get it working but it is not a SOLUTION

That's great news.
Only thing is i don't know how to downgrade it . I've tried to flash the unit again but BTLD always goes 006 and I'm stuck with id5 since. Any help?

[Lux]

apx1 display needs 8.7v
apx2 display needs 12v

Ok, so there is no chance to use it with my updated id4?
But if i come back from updated id5 to native id4 will it work?

Yes if you downgrade it back to id4 and code it for apix2 it will work fine , with id5 now code it to apix1,spi and try to restart sevral times hu ,in one of restart it will start the screen working normaly but when it shutdown it will not work again need to do sevral reboots again till get it working but it is not a SOLUTION

That's great news.
Only thing is i don't know how to downgrade it . I've tried to flash the unit again but BTLD always goes 006 and I'm stuck with id5 since. Any help?

To downgrade the bootloader you need to clear v850 chip then you can RE-flash the unit to ID4.

[HU_man]

Succeed downgrade to ID4 after clear V850 eeprom.

[Matthew53]

Is anyone know what additional parameters need to be coded in order to get evo from G30 working with apix1 screen from standard NBT? Or maybe it's dependent of I-level? I heard that apix1 screen doesn't work on I-level greater than 18-03, but not sure about that.

Edit: coded EVO with F06 FA and then coded CID FDL parameters and it works this way. I missed this information in this thread

[mr_nitroz]

Hello to all,

I am looking for help with retrofitting NBT EVO in F06 2014 with original NBT screen. I have coded all what was mentioned here on forum, but still no success. Can someone please check for me my NCD file if all is correct?
NBT2 unit is: HWEL-00002FC3-001.004.001
NBT2 software version: NBTevo_N18032I
NBT2 software date: 18-03

Thanks in advance!

[DayvG]

Hello to all,

I am looking for help with retrofitting NBT EVO in F06 2014 with original NBT screen. I have coded all what was mentioned here on forum, but still no success. Can someone please check for me my NCD file if all is correct?
NBT2 unit is: HWEL-00002FC3-001.004.001
NBT2 software version: NBTevo_N18032I
NBT2 software date: 18-03

Thanks in advance!

Have you fitted a voltage converter to the CID cable?

[mr_nitroz]

Yes I bought this cable from ebay: https://www.ebay.com/itm/333356271646?mk...media=COPY

Screen had sign no signal, after FDL coding just black screen.