Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to make a Bench using FEM for DUMMIES
27-08-2017, 17:22 PM,
(This post was last modified: 07-09-2017, 20:06 PM by Mwahab.)
Post: #1
|
|||
|
|||
How to make a Bench using FEM for DUMMIES
Hello!
I know many in here need to set up their, one of the easy ways is using FEM_BODY it will be as follows. +12V Ground CAN Signals Ethernet from FEM to HU (OABR) for EVO Ethernet from FEM to RJ (PC) FEM Section +12v to PIN 33 in black connector A173*3B Ground to PIN 33 in White connector A173*4B Remember to make bridge and leave it, we will get to this point later in here. Now Ethernet cable from FEM to PC. A73*8B As the diagram showing I will write it in details later. Now Your FEM is connected and can be read in Esys. Headunit section For +12v its on Pin 15 Ground PIN 12 Ethernet, in NBT EVO is through OABR and here is it From the small port on FEM to OABR -- All what is left is CAN signals. A73*8B on FEM PIN 49 - 50 to HU Yellow/brown PIN 49 Yellow/red PIN 50 HU at PIN CAN L 9 - CAN H 11 FEM A73*8B To be continued.
|
|||
Reputation: +4 - Loliceman [+1] , bawareca [+1] , simonchs [+1] , bryosb [+1] | |||
27-08-2017, 18:30 PM,
Post: #2
|
|||
|
|||
RE: How to make a Bench using FEM for DUMMIES
Also, to be safe, I have a CAN filter (cheap chinese one) between FEM and HU to filter out VIN msgs.
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
28-08-2017, 00:02 AM,
Post: #3
|
|||
|
|||
How to make a Bench using FEM for DUMMIES
What if the fem_body goes to sleep mode? how can I wake it up? When it goes to sleep mode I can't even see it on esys. fem_gateway is there, but fem_body is gone.
Sent from my iPhone using Tapatalk Pro |
|||
28-08-2017, 12:39 PM,
Post: #4
|
|||
|
|||
RE: How to make a Bench using FEM for DUMMIES
(28-08-2017, 00:02 AM)bmwdd Wrote: What if the fem_body goes to sleep mode? how can I wake it up? When it goes to sleep mode I can't even see it on esys. fem_gateway is there, but fem_body is gone. Tool32 - FEM_20 - Sterun_kelmmen - KL15_EIN
|
|||
28-08-2017, 23:50 PM,
Post: #5
|
|||
|
|||
How to make a Bench using FEM for DUMMIES
The fem is not responding to tool32 when it goes to sleep.... it's like the ecu has been shutdown (but fem_gw is active)
Sent from my iPhone using Tapatalk Pro |
|||
29-08-2017, 01:25 AM,
Post: #6
|
|||
|
|||
RE: How to make a Bench using FEM for DUMMIES
As OP said, use tool32 to set KL15 before it goes to sleep - then it won't got to sleep again!
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
Reputation: +1 - Mwahab [+1] | |||
29-08-2017, 01:35 AM,
Post: #7
|
|||
|
|||
RE: How to make a Bench using FEM for DUMMIES
(29-08-2017, 01:25 AM)pshoey Wrote: As OP said, use tool32 to set KL15 before it goes to sleep - then it won't got to sleep again! I wanna add one more thing. My FEM for some reason, never went to sleep.
|
|||
29-08-2017, 02:23 AM,
Post: #8
|
|||
|
|||
How to make a Bench using FEM for DUMMIES
I think i tried but that doesn't make any different, maybe i will try again
Sent from my iPhone using Tapatalk Pro |
|||
29-08-2017, 02:26 AM,
Post: #9
|
|||
|
|||
RE: How to make a Bench using FEM for DUMMIES
(29-08-2017, 02:23 AM)bmwdd Wrote: I think i tried but that doesn't make any different, maybe i will try again Can you read VIN from Esys?
|
|||
29-08-2017, 05:34 AM,
Post: #10
|
|||
|
|||
RE: How to make a Bench using FEM for DUMMIES
You have a FEM or BDC ???? BDC does not work like that!
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 791 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
MGU Bench connection | kimz | 4 | 570 |
22-04-2024, 17:06 PM Last Post: kimz |
|
Test bench Connection to CAN ECU's | HaakonA | 3 | 329 |
03-04-2024, 07:24 AM Last Post: sixcode |
|
Tool for bench read 8hp | Garryq | 9 | 1,744 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
Bosch MEVD172H bench backup | mrproper | 1 | 291 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
ENAV2 bench activation | Airbus | 10 | 1,015 |
25-02-2024, 08:17 AM Last Post: jb2005 |
|
Motronic 3.3.1 bench | jaramillo | 3 | 226 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
|
Dde Coding/flash with esys in bench? | ruben_17non | 0 | 220 |
08-02-2024, 21:28 PM Last Post: ruben_17non |
|
Entrynav2 - Trying to Trigger Component Protection on Bench | 2002JCW | 5 | 602 |
30-01-2024, 16:44 PM Last Post: DEJMIEN |
|
NBT display on bench without unit | djordan | 4 | 386 |
15-01-2024, 08:08 AM Last Post: Powerlab |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content