[Loliceman]

I flash a zgw from f25 with f10 zgw2 hwl and btld car starts,nbt all of function works but have flexy ray error and icm problem dsc and abs out of order .i think problem with may be flexy ray is diffirent cars .so i am waiting used two zgw from 10 one of than metal case zg1 other one zgw2 mid. also i will flash them and i will try ıt .how can i relearn to zgw flexy ray may be that is the solution

Your modification on hwel and the hardware will make this difficult.
Have you tried flexray initilization? If so, you need to run very specific and complicated commands through tool32 to reroute the signals etc.
What MY is the F10 you put this in?

Many Metal case ZGW is not flashable to "LCI swfl". Plastic ZGW MID will probably work in-car with NBT after flashing, but in my experience ZGW plastic MID does not have eth HW on the pcb so you don't have any use for this in a bench environment other than for coding/diagnostics.