Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F Series CIC - SWSigStatus rejected - Any ideas?
06-10-2018, 04:57 AM,
Post: #1
|
|||
|
|||
F Series CIC - SWSigStatus rejected - Any ideas?
Hello,
I had problems at first with SWT Patcher, so I decied to use factory certs. Because SWT patcher changed root certs, factory FSC would not work anymore. I virginized SWT and flashed CIC in F10 to newest software using Esys. ALL SWFL and IBAD flashed no problem. I wrote data by identifier, and coded unit. I loaded all factory certs, and all are accepted. Tried to load maps, maps loaded no problem, and on restart, navigation is grey. All certs are accepted. Only problem I can see is SWSigStatus rejected - but I don't understand why. Please let me know if you know how to fix, happy to pay. Here is status from Esys: --> GetStatus <-- RootCertStatus accepted SWSigStatus rejected SWTApplications <-- FSCSCertStatus accepted FSCStatus accepted AppNr./UpgrIdx 23(0x17)/1(0x01) SWTType SWTclassic full <-- FSCSCertStatus accepted FSCStatus accepted AppNr./UpgrIdx 25(0x19)/1(0x01) SWTType SWTclassic full <-- FSCSCertStatus accepted FSCStatus accepted AppNr./UpgrIdx 27(0x1B)/1(0x01) SWTType SWTclassic full <-- FSCSCertStatus accepted FSCStatus accepted AppNr./UpgrIdx 111(0x6F)/1(0x01) SWTType SWTclassic full <-- FSCSCertStatus accepted FSCStatus not available AppNr./UpgrIdx 156(0x9C)/1(0x01) SWTType SWTclassic full <-- FSCSCertStatus accepted FSCStatus not available AppNr./UpgrIdx 155(0x9B)/1(0x01) SWTType SWTclassic full <-- FSCSCertStatus not available FSCStatus accepted AppNr./UpgrIdx 45(0x2D)/45(0x2D) SWTType SWTshort RoutineResult: OK <-- ok |
|||
06-10-2018, 06:05 AM,
Post: #2
|
|||
|
|||
RE: F Series CIC - SWSigStatus rejected - Any ideas?
How did you make CIC virgin?
Problem is that the sig cert is not accepted and the patched file which “makes the CIC virgin” does more than that. So if you used patcher you must use patched fsc. But also remember to store the sig cert | BimmerFiks AS | Instagram | |
|||
06-10-2018, 06:45 AM,
Post: #3
|
|||
|
|||
RE: F Series CIC - SWSigStatus rejected - Any ideas?
(06-10-2018, 06:05 AM)SweetBMW Wrote: How did you make CIC virgin? (06-10-2018, 06:05 AM)SweetBMW Wrote: How did you make CIC virgin? (06-10-2018, 06:05 AM)SweetBMW Wrote: How did you make CIC virgin? Sig cert should be accepted: RootCertStatus accepted Unless the root cert is not the same? By flashing entire CIC, ALL SWFL were flashed, this would replace all of the certs with the factory data from my understanding. I virginized before by telnetting into CIC, and deleting the SWT data, and restoring factory original versions. After this all SWT went to not loaded. Then I flashed entire unit. What is SWSigStatus? This is only thing that is rejected. I did not flash BTLD, I don't think any data for SWT is contained in the bootloader. Thanks! |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
dissable RDC on G series ? | xMoses | 6 | 210 |
02-05-2024, 08:48 AM Last Post: Node |
|
BMW F40 (1 series) no FZD module | Ibrahim24 | 5 | 183 |
01-05-2024, 19:27 PM Last Post: Siki78 |
|
Difference 677 vs. 688 F series ? | AlpinWeiss2k18 | 8 | 434 |
16-04-2024, 19:55 PM Last Post: sebastianfernandes |
|
Making F-series combox work in e-series | Ryn079 | 5 | 630 |
11-04-2024, 15:03 PM Last Post: wrp_199 |
|
Lost Navigation - aircon wont turn off 2016 BMW 2 series | DannyDans435 | 6 | 282 |
08-04-2024, 08:45 AM Last Post: painsage |
|
HWEL differences of seat modules (F series) | azwgh | 8 | 302 |
04-04-2024, 21:48 PM Last Post: azwgh |
|
mileage g series virtual bosch id7 | tigre | 2 | 270 |
22-03-2024, 13:00 PM Last Post: tigre |
|
G Series KEY in F34 | Rajco | 5 | 427 |
20-03-2024, 18:56 PM Last Post: Rajco |
|
Solved ✔ Cic update on E series | alsamaraee | 16 | 881 |
28-02-2024, 11:38 AM Last Post: alsamaraee |
|
ISTA/P is no longer supported for F, G & I series | see_you_33 | 22 | 5,276 |
20-02-2024, 04:49 AM Last Post: Alenorm |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content