Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to make a Bench using FEM for DUMMIES
19-06-2018, 20:57 PM,
Post: #31
|
|||
|
|||
RE: How to make a Bench using FEM for DUMMIES
Hello! tell me how to wake up nbt without filter сan? fem gw and body I see
|
|||
10-03-2019, 14:00 PM,
Post: #32
|
|||
|
|||
RE: How to make a Bench using FEM for DUMMIES
(28-08-2017, 12:39 PM)Mwahab Wrote:(28-08-2017, 00:02 AM)bmwdd Wrote: What if the fem_body goes to sleep mode? how can I wake it up? When it goes to sleep mode I can't even see it on esys. fem_gateway is there, but fem_body is gone. this command i try is ok, but now I have a question: when u active the fem kl15,how to close it? I find it kl15 can not close,Unless power is cut off |
|||
18-03-2019, 10:04 AM,
(This post was last modified: 18-03-2019, 11:16 AM by tcp443.)
Post: #33
|
|||
|
|||
RE: How to make a Bench using FEM for DUMMIES
hi
i got a bdc and managed to hook up the nbt evo and zbe4 but do i need to put a resistor at KCAN4 of the NBT / ZBE4? if yes, may i know the value of the resistor please? i can get hu_nbt to come up. can code it and also program it without any issues. but just cant seem to get (G12) ZBE4 to show up. i tried with 3 different ones (working ones taken from a running car). but still could not get ZBE4 to show up in esys ecu list. if you feel that I have in some way contributed / helped solve your issues/problems/requests, please do not forget to press thanks or rep button. Much appreciated.
|
|||
19-03-2019, 01:54 AM,
Post: #34
|
|||
|
|||
RE: How to make a Bench using FEM for DUMMIES
now i have another problem. yesterday was all OK. then i flashed bdc gw and bdc body with latest firmware. now no matter what i do (in tool32 to enable KL15), i can only see BDC_GW in ecu list.
flashing was all successful yesterday. if you feel that I have in some way contributed / helped solve your issues/problems/requests, please do not forget to press thanks or rep button. Much appreciated.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 741 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
MGU Bench connection | kimz | 4 | 515 |
22-04-2024, 17:06 PM Last Post: kimz |
|
Test bench Connection to CAN ECU's | HaakonA | 3 | 321 |
03-04-2024, 07:24 AM Last Post: sixcode |
|
Tool for bench read 8hp | Garryq | 9 | 1,690 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
Bosch MEVD172H bench backup | mrproper | 1 | 285 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
ENAV2 bench activation | Airbus | 10 | 978 |
25-02-2024, 08:17 AM Last Post: jb2005 |
|
Motronic 3.3.1 bench | jaramillo | 3 | 219 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
|
Dde Coding/flash with esys in bench? | ruben_17non | 0 | 210 |
08-02-2024, 21:28 PM Last Post: ruben_17non |
|
Entrynav2 - Trying to Trigger Component Protection on Bench | 2002JCW | 5 | 576 |
30-01-2024, 16:44 PM Last Post: DEJMIEN |
|
NBT display on bench without unit | djordan | 4 | 372 |
15-01-2024, 08:08 AM Last Post: Powerlab |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content