[youbarajs]

I tried to change the VIN in the Combox module using Tool32, here are the steps i followed

Loaded Tool32
Selected cmediar
Under jobs, selected c_fg_schreiben
Pasted the VIN on the section below Arguments
Clicked on 1 time process button (or whatsoever its called, (1~>))
repeated the process for c_fg_auftrag

While the process states job successful, but when I read the VIN using INPA its shows "yyyyyyyy"

Am i doing something wrong?

(I am trying to change the vin back to my original vin)

[JCTI]

Do you input only VIN or VIN with the 17th digit checksum number?
I always use the VIN with 17th digit checksum number (from NCSExpert for example) and it usually works. Never done Combox tho.

[dstrickland]

Inpa is reading from the UIF field.

If you run job C_FG_LESEN it will likely show your correct vin, if you want to get rid of the YYYYYY you need to also write the uif using job AIF_SCHREIBEN.

[atalay]

flash it with winfpf

[youbarajs]

Do you input only VIN or VIN with the 17th digit checksum number?
I always use the VIN with 17th digit checksum number (from NCSExpert for example) and it usually works. Never done Combox tho.

Vin + Checksum from the ncsexpert FA screen (total of 18 digits,17 digits VIN and 1 checksum)

---

Inpa is reading from the UIF field.

If you run job C_FG_LESEN it will likely show your correct vin, if you want to get rid of the YYYYYY you need to also write the uif using job AIF_SCHREIBEN.

I will try this and report back..

[youbarajs]

I tired to write vin with AIF_SCHREIBEN job, but it gives me following error, am I missing something

"Error_vehicle_identification_NR"

I followed the similar process of selecting CMEDIAR and changing the VIN using  AIF_SCHREIBEN job.