Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
cas4+ programmer
13-10-2019, 17:41 PM,
Post: #1
|
|||
|
|||
cas4+ programmer
Hi there,
Im looking for cas4+ programmer and I have in mind cg pro or R280. Does anybody have experience with those? Reviews? Thanks! |
|||
13-10-2019, 18:15 PM,
Post: #2
|
|||
|
|||
RE: cas4+ programmer
Hi
VVDI PROG work good |
|||
13-10-2019, 18:25 PM,
Post: #3
|
|||
|
|||
RE: cas4+ programmer
VVDI could a solution for 6WB new gen. flash ?
|
|||
13-10-2019, 21:05 PM,
(This post was last modified: 13-10-2019, 21:18 PM by pocinas.)
Post: #4
|
|||
|
|||
RE: cas4+ programmer
which one exacly chip is?
look attachment There are Few types of CAS4 MCUs (Processors) CAS4 MC9S12XDP512 with MASK 1L15Y CAS4+ MC9S12XEP100 with MASK 5M48H CAS4+ MC9S12XEP100 with MASK 1N35H so yes VVDI PROG Support all of this MCU And i double check for you.. in 6Wb it is fittles eeprom 160D0WT (35160) which is supported on r270+ programmer and VVDI Prog, but you must buy NEW chip 160D0WT because this is not programmed easy, or if is you must have special adapter to VVDI (look VVDI PROG 35080 adapter),, but the best just to incase to do not work on oryginal EEPROM (leave somwhere just to incase) order new blank 160D0WT (35160) and program new millage on New chip. P.S with reading this eeprom is not problem...... problem is with writed because first 32 bits is crypted and must use special tools to reset this.. My post helps you? Please Hit REPUTATION and THANKS Buttons
|
|||
13-10-2019, 21:32 PM,
(This post was last modified: 13-10-2019, 21:35 PM by volavka.)
Post: #5
|
|||
|
|||
RE: cas4+ programmer
HEXTAG from Microtronik work good on most cas's
Take a look here for feedback https://cartechnology.co.uk/showthread.php?tid=50032 Regards BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
14-10-2019, 00:22 AM,
Post: #6
|
|||
|
|||
RE: cas4+ programmer
I use Yanhua Mini ACDP Key Programmer with the CAS4 Module. Works great on my 2014 F10.
|
|||
14-10-2019, 20:36 PM,
Post: #7
|
|||
|
|||
RE: cas4+ programmer
Thanks for info! Little problem is that I recently bought CGDI so my budget is little bit limited. Hextag looks very good but I must only hope that cgdi will be able to make a key from data downloaded by hextag (should be). ACDP also looks very good but at the moment out of my budget.
I think 1L15Y is supported by R270+ which I also have so Im mainly interested in the 5M48H and 1N35H |
|||
14-10-2019, 20:47 PM,
Post: #8
|
|||
|
|||
RE: cas4+ programmer
(14-10-2019, 20:36 PM)BobbySD Wrote: Thanks for info! Little problem is that I recently bought CGDI so my budget is little bit limited. Hextag looks very good but I must only hope that cgdi will be able to make a key from data downloaded by hextag (should be). ACDP also looks very good but at the moment out of my budget. I do hear what you are saying. what i like about ACDP is that no soldering is required for the CAS4. It took me less then 10mins to read & decrypt the CAS4 Chip and program a new key fob. Good luck with the CGDI let's us know how you make out when you do it. |
|||
14-10-2019, 22:59 PM,
Post: #9
|
|||
|
|||
RE: cas4+ programmer
I always read out CAS3+ and CAS4+ with Hextag and load dump into CG Pro or CGDI to make key. Works great.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
CAS4 Removed Capacitor for VVDI Prog | Rajco | 5 | 439 |
14-02-2024, 19:32 PM Last Post: Jumper |
|
Problem with cas4+ and Key ADD with VVDI | budddyyy | 11 | 759 |
10-02-2024, 07:23 AM Last Post: body1982 |
|
BMW Explorer moto key programmer | jaramillo | 1 | 295 |
17-12-2023, 17:13 PM Last Post: jaramillo |
|
[Solved] Is possible retrofit KEyless entry in Bmw F25/F26 CAS4 | ruben_17non | 8 | 918 |
01-12-2023, 22:20 PM Last Post: ruben_17non |
|
CAS4 flash 5wk50 | javorkrustev | 4 | 408 |
09-10-2023, 17:10 PM Last Post: loki954 |
|
Bricked cas4+ 1n35h | Misterwasp | 7 | 774 |
18-08-2023, 23:28 PM Last Post: atiwok |
|
Solved ✔ CAS4 Eeprom Repair? | bmchicago | 3 | 456 |
19-07-2023, 15:15 PM Last Post: bmchicago |
|
Solved ✔ Cas4 issue | jaramillo | 3 | 490 |
24-06-2023, 17:47 PM Last Post: jaramillo |
|
Solved ✔ CAS4 need to change key frequency | rana | 8 | 865 |
12-05-2023, 04:35 AM Last Post: rana |
|
R270 Programmer modify dumps? | Burnout | 12 | 1,015 |
22-03-2023, 10:41 AM Last Post: Burnout |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content