Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
bmw i3 kafas disappeared. SOLVED
|
03-02-2022, 10:53 AM,
(This post was last modified: 04-02-2022, 17:29 PM by Nunaat.)
Post: #1
|
|||
|
|||
bmw i3 kafas disappeared. SOLVED
Hi friends,
About 3 years ago I added to my bmw i3 acc and traffic jam among other options. The vehicle already had PMA, so it already had SAS. A few days ago I started receiving collision warning and pedestrian detection failures. but after a while it worked again, until now it is a permanent failure. The errors according to ista+ can be seen in the attached image. There is no KAFAS module in ESYS. KAFAS module does not appear and SAS, KOMBI was in error. I have verified that there is power at fuse 57 of kafas and 60 of SAS. Can someone tell me what could be the problem? Bad module? Kafas camera broken? Thanks for your help. Solved. The problem was negative connection. |
|||
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
