Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ NBT Evo retrofit not receiving Messages from remote services connected drive
02-03-2022, 11:16 AM,
(This post was last modified: 15-03-2022, 22:51 PM by Clusters.)
Post: #1
|
|||
|
|||
NBT Evo retrofit not receiving Messages from remote services connected drive
I am using an emulator with my retrofitted NBT EVO and ATM from the same car and I have a problem with the connected drive, if I send a remote service request via the My BMW app the car does not receive the message, so I cannot lock/unlock/flash headlights or receive a sent destination, the app reports that it successfully sends the message to the car.
All the other services work perfectly both in the car and on the app so I can see live fuel level and location etc in the app. In my connected drive portal it shows Unlimited access to remote services and I have renewed my subscription to Connected Drive Professional. I have updated Connected Drive in the car several times and it has made no difference. the thing is, if the car is already on or running then it does work ok just not if the car is parked up and locked so I suspect that something needs power while car is in sleep mode so I just need to know what. Thanks |
|||
02-03-2022, 11:23 AM,
Post: #2
|
|||
|
|||
RE: NBT Evo retrofit not receiving Messages from remote services connected drive
(02-03-2022, 11:16 AM)maxwell4321 Wrote: I am using an emulator with my retrofitted NBT EVO and ATM from the same car and I have a problem with the connected drive, if I send a remote service request via the My BMW app the car does not receive the message, so I cannot lock/unlock/flash headlights or receive a sent destination, the app reports that it successfully sends the message to the car. Not trying to be an a**hole but dig deeper next time https://cartechnology.co.uk/showthread.p...m+retrofit Post #48 and upwards I like Objective-C |
|||
03-03-2022, 21:26 PM,
Post: #3
|
|||
|
|||
RE: NBT Evo retrofit not receiving Messages from remote services connected drive
same here.
i take SMS for activate in bench but evo and atm in car not work remote services Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
03-03-2022, 22:17 PM,
Post: #4
|
|||
|
|||
RE: NBT Evo retrofit not receiving Messages from remote services connected drive
|
|||
12-03-2022, 19:04 PM,
(This post was last modified: 15-03-2022, 17:00 PM by maxwell4321.)
Post: #5
|
|||
|
|||
RE: NBT Evo retrofit not receiving Messages from remote services connected drive
Ok connected emulator to 30F and can now flash the headlights/lock/unlock/horn BUT I still cannot/do not receive any BMW messages for destinations that are sent from the app (Android or iPhone) so still looking for a solution for that if anyone can help.
|
|||
15-03-2022, 16:50 PM,
Post: #6
|
|||
|
|||
RE: NBT Evo retrofit not receiving Messages from remote services connected drive
Finally solved this and now get messages just fine, added 6NW and 6WD to FA and coded ATM and Evo then updated services via ISTA. Also reinstalled the app on the phone for good measure.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content