[AlpinWeiss2k18]

Hello!
I want to connect the icom without ethernet cable.
I config the wifi point and the icom next as i found in a PDF from ISTA+. The notebook is an Panasonic Toughbook CF-54 mk2. I reinstall windows and all apps, but doesn’t work. I can’t see the icom in itool radar.
Can someone can help me please?
Thank you!

[your_man]

Are you sure about your icom that it support WIFI? Is it built in ?
i recommend Using any external Access point , link it with icom easily .
i am using my icom A2 with a cheep Tp Link wifi access point without any issues i only Edited the access point ip in the same range with icom
for example the icom ip is 169.254.92.38

make the Access point ip 169.254.92.200
you can use any old ruter or adsl router that you have in your store. only link it with ethernet to the Icom and enjoy your bmw wirelessly

[boukrama]

intel wifi card not connecting with wifi point

[mad_presley]

If your laptop is Windows 10 installed, them manual from .pdf will not work for you.
If you use Win 10 you have to be connected to internet or hotspot will not work.
First configure mobile hotspot as described in link in attachment. Enter a network name and password what you added in ICOM web. If you followed .pdf it should be name: ICOM pass:12345678. When done click on network in taskbar and activate Mobile hotspot. Go to Ethernet->Change adapter options and you`ll see new adapter named Microsoft...Right click->properties and change from DHCP to Static IP and write your ICOM IP.
This is in short, but you should get the point

[nonymou]

If your laptop is Windows 10 installed, them manual from .pdf will not work for you.
If you use Win 10 you have to be connected to internet or hotspot will not work.
First configure mobile hotspot as described in link in attachment. Enter a network name and password what you added in ICOM web. If you followed .pdf it should be name: ICOM pass:12345678. When done click on network in taskbar and activate Mobile hotspot. Go to Ethernet->Change adapter options and you`ll see new adapter named Microsoft...Right click->properties and change from DHCP to Static IP and write your ICOM IP.
This is in short, but you should get the point

If you do some changes with cmd hotspot works without internet too

but icom doesn´t want to connect with the hotspot in my case
even with internet connection

[mad_presley]

Since windows update 21h2 nether CMD nor Hotspot app from store works for me. Yes it activates hotspot, but no connection.
Make sure in ICOM web->Device configuration you set it up in mode ISPI-Next. And one stupid mistake I made last time was different passwords in ICOM and PC.

[AlpinWeiss2k18]

Hello!
I bought the ICOM from a local BMW dealership.
I config on the wifi router, but need when i m not at job.

Are you sure about your icom that it support WIFI? Is it built in ?
i recommend Using any external Access point , link it with icom easily .
i am using my icom A2 with a cheep Tp Link wifi access point without any issues i only Edited the access point ip in the same range with icom
for example the icom ip is 169.254.92.38

make the Access point ip 169.254.92.200
you can use any old ruter or adsl router that you have in your store. only link it with ethernet to the Icom and enjoy your bmw wirelessly

---

Have any similar alternative?

intel wifi card not connecting with wifi point

---

i will try.
Thank you!

Since windows update 21h2 nether CMD nor Hotspot app from store works for me. Yes it activates hotspot, but no connection.
Make sure in ICOM web->Device configuration you set it up in mode ISPI-Next. And one stupid mistake I made last time was different passwords in ICOM and PC.