[Twointje]

I thinking was Sedoy that made that program to change the AGR rate , and that never worked for me.
Would not now how to do it with Tool 32.

[simonchs]

I thinking was Sedoy that made that program to change the AGR rate , and that never worked for me.  
Would not now how to do it with Tool 32.

There is a post was lost during this forum got hacked.

Code:

Find the engine PRG file first -> load G_MOTOR.GRP, if shows  D71N47C0, then you need to load D71N47C0.PRG(this is a example)


search for abgleich then

abgleich_lesen
agr
press F5, you should see 0.0

abgleich_verstellen
agr;1.1(if give error use agr;0.7)
press F5

abgleich_prog
agr;1.1(or 0.7, the value that is ok with verstellen)
press F5

Job done, you can check with job abgleich_lesen, param agr, if not 0.0 is OK