Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA: Data status (integration level) error message
07-09-2022, 23:57 PM,
Post: #1
|
|||
|
|||
ISTA: Data status (integration level) error message
Hello everyone.
I have a 2018 R1200GS. Using ISTA 4.32, I was able to accidentally flash software that caused a "no communication with engine control" error message. There are no stored codes, just that error message. I reconnected my laptop to flash a different version of software to the bike, but I received the following error message: "The connected vehicle has an unknown data status (works integration level: K001-17-07-513, actual integration level: K001-22-07-506) This status cannot be processed with ISTA. Make sure the latest version of ISTA has been installed or contact Technical Support." Is there a way to determine which version of ISTA is required for K001-22-07-506? Thank you. |
|||
08-09-2022, 05:45 AM,
Post: #2
|
|||
|
|||
RE: ISTA: Data status (integration level) error message
Hello.
After the firmware, does the motor work? ISTA will no longer help you. ESYS required. First you need to find a connection with the DME unit. If you don't know what you're doing, trust your technique to another person who does. Fixing is always harder and more expensive. |
|||
08-09-2022, 06:02 AM,
Post: #3
|
|||
|
|||
RE: ISTA: Data status (integration level) error message
I have same message on TFT "No Communication with DME..." I haven't problems about integration Level or unknown status, I made flash with esys and I Step 4.36.40, tryed different firmware (no downgrade) and total re write included BTLD, no changes, it's the same bike as yours.
The motorcycle has a broken exhaust gas actuator in next days it will be changed, also I will upload a 2018 IStep, other step is clone DME if not solve BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416 ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series |
|||
09-09-2022, 00:21 AM,
(This post was last modified: 09-09-2022, 00:27 AM by Rememo.)
Post: #4
|
|||
|
|||
RE: ISTA: Data status (integration level) error message
(08-09-2022, 05:45 AM)Beard Wrote: Hello. Thank you for the information, Beard. The bike still runs fine. I'm comfortable with ISTA, but now it sound like I'll have to research ESYS. (08-09-2022, 06:02 AM)BMWzone Wrote: I have same message on TFT "No Communication with DME..." I haven't problems about integration Level or unknown status, I made flash with esys and I Step 4.36.40, tryed different firmware (no downgrade) and total re write included BTLD, no changes, it's the same bike as yours. Ouch. That doesn't sound good for either of us. I'm disappointed that ISTA would allow me to flash a file that it couldn't handle after I flashed it. It was my own mistake, but... |
|||
09-09-2022, 06:43 AM,
Post: #5
|
|||
|
|||
RE: ISTA: Data status (integration level) error message
How is ISTA and NOT YOU responsible if you use it in the ways it was never meant to be used????
4.32 ISTA was released in 2021. You flashed iStep of late 2022!!! The ONLY way that is possible if using OLD ISTA with MUCH NEWER psdzdata!!! Did ISTA itself suddenly managed to update it's psdzdata to such level JUST BY ITSELF??? You should really stop blaming something else for YOUR OWN deeds... Use proper ISTA for that level and you will have no problems!!!! Old ISTA simply DOESN'T HAVE proper prg files to deal with such new iStep. |
|||
09-09-2022, 07:41 AM,
Post: #6
|
|||
|
|||
RE: ISTA: Data status (integration level) error message
Let me know if i can help you with ESYS and your problem, we do a lot of bikes BMW here. Flash a valif ISTEP with ESYS and your problem should be solved. Flashing TFT and Telematics Module takes a lot of time!
|
|||
09-09-2022, 18:38 PM,
(This post was last modified: 09-09-2022, 18:40 PM by Rememo.)
Post: #7
|
|||
|
|||
RE: ISTA: Data status (integration level) error message
(09-09-2022, 06:43 AM)Node Wrote: How is ISTA and NOT YOU responsible if you use it in the ways it was never meant to be used???? I already said it was my mistake. But I don't believe that a 2021 version of ISTA should allow for the flashing of 2022 psdzdata files. It's just bad programming practice. I'd be fired for allowing users to do something like that. (09-09-2022, 07:41 AM)SebSeb0404 Wrote: Let me know if i can help you with ESYS and your problem, we do a lot of bikes BMW here. Flash a valif ISTEP with ESYS and your problem should be solved. Flashing TFT and Telematics Module takes a lot of time! You sir, are awesome. I will probably take you up on the offer, and owe you a beer afterwards. |
|||
09-09-2022, 18:47 PM,
Post: #8
|
|||
|
|||
RE: ISTA: Data status (integration level) error message
(09-09-2022, 18:38 PM)Rememo Wrote: I already said it was my mistake. But I don't believe that a 2021 version of ISTA should allow for the flashing of 2022 psdzdata files. It's just bad programming practice. I'd be fired for allowing users to do something like that. WHY would it do that??? If files are there and it understands them, then what's the problem??? AFAIK many users here like using old ISTAs with newest psdzdatas and would be very unhappy if that was not allowed... |
|||
09-09-2022, 21:47 PM,
Post: #9
|
|||
|
|||
RE: ISTA: Data status (integration level) error message
(09-09-2022, 18:47 PM)Node Wrote:(09-09-2022, 18:38 PM)Rememo Wrote: I already said it was my mistake. But I don't believe that a 2021 version of ISTA should allow for the flashing of 2022 psdzdata files. It's just bad programming practice. I'd be fired for allowing users to do something like that. Thank you for all of your help. |
|||
10-09-2022, 06:55 AM,
Post: #10
|
|||
|
|||
RE: ISTA: Data status (integration level) error message
Install latest ISTA and see if error still there. If so, ESYS and reflash.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ista for diagnose rt1200 | db8000 | 5 | 139 |
31-03-2024, 15:15 PM Last Post: db8000 |
|
Ista 4.45.21 | Viktor777tim | 8 | 907 |
18-03-2024, 00:02 AM Last Post: Viktor777tim |
|
How to code 5 level heated grip on S1000RR TFT? | dlgudqja1282 | 14 | 1,958 |
28-11-2023, 01:57 AM Last Post: dlgudqja1282 |
|
ISTA+ motorrad | Danmac | 12 | 2,426 |
25-10-2023, 14:31 PM Last Post: ReW |
|
Advantages of updating I-Level? | laalves911 | 1 | 385 |
04-09-2023, 08:48 AM Last Post: Vojno |
|
ISTA+ Failed to downlaod security tokens | k666 | 34 | 3,280 |
28-08-2023, 10:20 AM Last Post: k666 |
|
GS '08 K25 - Reactivate RDC after deletion with ISTA-P | Nerox | 3 | 657 |
27-11-2022, 08:49 AM Last Post: rd07 |
|
SOLVED - R1200GS 2015 manage with ISTA-D or -P? | Edward1968 | 9 | 1,329 |
30-09-2022, 13:18 PM Last Post: Edward1968 |
|
ISTA reads only with ENET cable | Edward1968 | 9 | 1,177 |
02-07-2022, 15:20 PM Last Post: dlgudqja1282 |
|
BMW Motorrad (RSD) Repair and Service Data 09.2017 | ferrum | 0 | 2,015 |
15-05-2019, 13:42 PM Last Post: ferrum |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content