[Chillmeister]

Hi,

I‘m facing a strange issue with a Dkombi2 G30 6WB. It runs perfectly on  swfl 004.040.011 but stays black with swfl 005.010.007. With both i steps it is fully answering in esys and i can flash and code whatever i want. Only issue is Display stays black with newest istep. 

Does somebody had a similar situation and maybe Solution to fix this? 

Thanks and best regards

[LeonidLunin]

005.010.007 - which Ilevel?

[Chillmeister]

I Step 22-11-540

[Chillmeister]

Today i found out it could be Eeprom related error. Played with stored km in Eeprom and if i put 500km on Eeprom, Tool32 shows 496km which is ok. But if I press Button on Kombi it only shows 241km which i think is too much difference.

Can somebody confirm it is normal and if Eeprom Data is also changed by flashing? If so it seems that Eeprom is corrupted and because of this i-Level Update doesn't work

Thanks for any help

[m5proud]

does eeprom soldered properly?

[Chillmeister]

does eeprom soldered properly?

thanks for responding 

Yes Eeprom soldered 100%. I desoldered NOR Flash and dumped it while waiting (for approx. 6 Month) for new one being delivered. Than will reflash, resolder and see what happens...