Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F30 FEM changed SM2 and IHKA show no communication
19-03-2023, 09:47 AM,
Post: #1
|
|||
|
|||
F30 FEM changed SM2 and IHKA show no communication
F30 FEM changed with used one SM2 and IHKA show no communication
any way to fix that or may be need to open ports? thank you so much |
|||
19-03-2023, 13:18 PM,
Post: #2
|
|||
|
|||
RE: F30 FEM changed SM2 and IHKA show no communication
try remove sm2, ihka on svt. then write svt
- Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- Remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
Reputation: +1 - iyade46 [+1] | |||
19-03-2023, 14:04 PM,
Post: #3
|
|||
|
|||
RE: F30 FEM changed SM2 and IHKA show no communication
Try to Update vcm
All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
Reputation: +1 - iyade46 [+1] | |||
20-03-2023, 09:23 AM,
(This post was last modified: 20-03-2023, 09:24 AM by iyade46.)
Post: #4
|
|||
|
|||
RE: F30 FEM changed SM2 and IHKA show no communication
|
|||
20-03-2023, 10:25 AM,
Post: #5
|
|||
|
|||
RE: F30 FEM changed SM2 and IHKA show no communication
E-sys options, check update vcm after tal execution, then vo code any ecu, read ecu.
It should be visible after that, make sure your FA is correct. All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
Reputation: +1 - iyade46 [+1] | |||
20-03-2023, 14:18 PM,
Post: #6
|
|||
|
|||
RE: F30 FEM changed SM2 and IHKA show no communication
(20-03-2023, 10:25 AM)Mwahab Wrote: E-sys options, check update vcm after tal execution, then vo code any ecu, read ecu. i did update vcm with that Fa file IHKA come online but SM2 didn't also changed SM2 module and check can and power all seems fine can you see if file need something ? thank you |