Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Add the ICM unit to bench setup
04-09-2023, 07:26 AM,
Post: #1
|
|||
|
|||
Add the ICM unit to bench setup
I want to add the ICM unit to my benchsetup for the NBT.
So is this the correct setup for that? No3 on ICM to 32 on ZGW No4 on ICM to 33 on ZGW And Power to no 18 on Icm and Earth to no 34 on Icm At least this is what i could read out of the Wiring Scheme from the ICM on TIS. And Yes, it is an LCI Unit. |
|||
04-09-2023, 08:33 AM,
Post: #2
|
|||
|
|||
RE: Add the ICM unit to bench setup
You don’t need ICM to get headunit working on the bench. ZGW, ZBE and any wake-up device it’s enough to get the heading working on the bench.
• EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
04-09-2023, 09:48 AM,
Post: #3
|
|||
|
|||
RE: Add the ICM unit to bench setup
ICM don't work on bench without other FlexRay ECU like DSC2
If my post helped you hit the thanks and reputation button. Thank you.
|
|||
04-09-2023, 09:50 AM,
(This post was last modified: 04-09-2023, 09:51 AM by Haug530d.)
Post: #4
|
|||
|
|||
RE: Add the ICM unit to bench setup
(04-09-2023, 08:33 AM)DEJMIEN Wrote: You don’t need ICM to get headunit working on the bench. ZGW, ZBE and any wake-up device it’s enough to get the heading working on the bench. I Already have the headunit working on bench, i just wanted to flash it before car installation. (04-09-2023, 09:48 AM)user_530d Wrote: ICM don't work on bench without other FlexRay ECU like DSC2 ah ok, thanks, guess i'll just install it in the car then. |
|||
04-09-2023, 10:53 AM,
Post: #5
|
|||
|
|||
RE: Add the ICM unit to bench setup
(04-09-2023, 09:50 AM)Haug530d Wrote:(04-09-2023, 08:33 AM)DEJMIEN Wrote: You don’t need ICM to get headunit working on the bench. ZGW, ZBE and any wake-up device it’s enough to get the heading working on the bench. You can flash NBT if you have ZGW rewired correctly. Do you want to flash something else? • EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
04-09-2023, 17:00 PM,
Post: #6
|
|||
|
|||
RE: Add the ICM unit to bench setup
my setup to flash/diagnose nbt or nbt evo:
1) network setting on PC 169.254.199.77 2) direct connection lan cable to HU (+12v to EthA on HU) 3) elm327 can wires 7/14 pin to can pin on HU 4) power on elm and using extratool on android (kl 15 simulator adapter) sent CAN message to HU 5) to program HU using in Esys gateway connection 169.254.199.99:6801 6) to diagnose HU using Tool32 in Ediabas.ini use Enet connection and instead Autodetect use 169.254.199.99 |
|||
04-09-2023, 18:10 PM,
(This post was last modified: 04-09-2023, 18:15 PM by Haug530d.)
Post: #7
|
|||
|
|||
RE: Add the ICM unit to bench setup
(04-09-2023, 10:53 AM)DEJMIEN Wrote:(04-09-2023, 09:50 AM)Haug530d Wrote:(04-09-2023, 08:33 AM)DEJMIEN Wrote: You don’t need ICM to get headunit working on the bench. ZGW, ZBE and any wake-up device it’s enough to get the heading working on the bench. I said i already have a working Bench setup, with NBT ZGW and ZBE. I have already flashed 2 NBT units and made one ZGW 02-mid to ZGW2 4SK. and im putting the NBT,ZBE,ICM and a ZGW 8SK into my Pre-Facelift F11, i just wanted to Flash the ISM before i installed it in the car, but i can also flash it inside the car, no problem. I'm also making a harness for the Facelift ICM, so that everything is reversible. (04-09-2023, 17:00 PM)VroomVroom Wrote: my setup to flash/diagnose nbt or nbt evo: I bought cables and simulator box on Ebay (From Bimmer8) and connection goes trough my router, so i can choose between one of my 5 computers to connect to the Bench setup. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ESys Launcher PRO Setup 2.8.1 | fengyonghua21 | 414 | 51,578 |
15-05-2024, 18:24 PM Last Post: Pommie |
|
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 791 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
MGU Bench connection | kimz | 4 | 570 |
22-04-2024, 17:06 PM Last Post: kimz |
|
Test bench Connection to CAN ECU's | HaakonA | 3 | 329 |
03-04-2024, 07:24 AM Last Post: sixcode |
|
E60 DSC unit, Cruise+brake vs ACC2 stop and go | GoNz0- | 4 | 204 |
29-03-2024, 09:11 AM Last Post: GoNz0- |
|
Tool for bench read 8hp | Garryq | 9 | 1,744 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
F80 Cluster - setup | iskullbox | 2 | 348 |
25-03-2024, 14:38 PM Last Post: Unspec |
|
Bosch MEVD172H bench backup | mrproper | 1 | 291 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
reset gps evo unit tool32 | Fx82 | 3 | 837 |
04-03-2024, 20:20 PM Last Post: Cerhio |
|
ENAV2 bench activation | Airbus | 10 | 1,015 |
25-02-2024, 08:17 AM Last Post: jb2005 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content