[dncomputech]

again you are doing all wrong , I guess you need to pay someone to do proper flashing and coding for you or spend sometime learning Esys , why you keep using detect CAFD , 

and why are you not saving the updated FA to the car , this retrofit is permanent so you need to update your FA in the car too .
[/quote]


No, I just argue with "Gizmo520d" about the SVT file I sent him. It's not like what I am, when I read ECU and saved SVT
Currently I do not do Detecting CAF SWE
Anyway, the "emhtuning" suggestion I will write 5AC to the car's FA and try again.
If I add 5AC to the car, I read the ECU into VO CODE the ECU FRM, JBBF, DSC2, SZL, KOMBI, ICM, FLA3
Am I missing anything?
Thank you very much

[dncomputech]

I saved the FA with 5AC into the car
Then VO ECU FRM, DSC, JBBFE, SZL, FLA, KOMBI.
At this time HBA was active, I checked HBA with Ista + (following Ista + guidelines) everything worked well
But when the car is blocked and the car is restarted, the HBA still does not work
Who can fix this error via Teamviewer quote me.
Thank you.

[dncomputech]

I saved the FA with 5AC into the car
Then VO ECU FRM, DSC, JBBFE, SZL, FLA, KOMBI.
At this time HBA was active, I checked HBA with Ista + (following Ista + guidelines) everything worked well
But when the car is blocked and the car is restarted, the HBA still does not work
Who can fix this error via Teamviewer quote me.
Thank you.

[dncomputech]

I saved the FA with 5AC into the car
Then VO ECU FRM, DSC, JBBFE, SZL, FLA, KOMBI.
At this time HBA was active, I checked HBA with Ista + (following Ista + guidelines) everything worked well
But when the car is blocked and the car is restarted, the HBA still does not work
Who can fix this error via Teamviewer quote me.
Thank you.