Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW BDC Bench Flashing
28-09-2019, 11:21 AM,
Post: #1
|
|||
|
|||
BMW BDC Bench Flashing
Hello mates,
I'm trying to flash BMW BDC on the table. I connect BDC like in the picture I can diagnose BDC, read FA, read and calc SVT and TAL, but I can't flash it. When I try to flash, it start and then end with error after some seconds. I tried with ICOM and ENET, same result. Can someone help me, please ? Thank you Bests |
|||
28-09-2019, 12:15 PM,
Post: #2
|
|||
|
|||
RE: BMW BDC Bench Flashing
(28-09-2019, 11:21 AM)paskuale Wrote: Hello mates,This ☝ diagram for BMW explorer not icom. |
|||
28-09-2019, 14:08 PM,
Post: #3
|
|||
|
|||
RE: BMW BDC Bench Flashing
Can you help me with right diagram please ?
I use this diagram with BMW-Explorer at table. |
|||
28-09-2019, 18:06 PM,
Post: #4
|
|||
|
|||
RE: BMW BDC Bench Flashing
(28-09-2019, 11:21 AM)paskuale Wrote: Hello mates,Hi you can flash it if you can activate KL15 (ignition) with tool32 if you cant you need to activate it by KEY without KL15 flash wont go
|
|||
28-09-2019, 22:35 PM,
Post: #5
|
|||
|
|||
RE: BMW BDC Bench Flashing
I don’t have key of this BDC, so I can’t activate KL15 by key.
Can you explain me how to activate KL15 by Tool32, please ? Thank you Bests |
|||
29-09-2019, 03:19 AM,
Post: #6
|
|||
|
|||
RE: BMW BDC Bench Flashing
|
|||
29-09-2019, 08:39 AM,
Post: #7
|
|||
|
|||
RE: BMW BDC Bench Flashing
I tried before with BDC and key, can't code or read FA, even BDC available in ista and tool 32 esys can't connect for some reason, I think something missing.
|
|||
29-09-2019, 18:17 PM,
Post: #8
|
|||
|
|||
RE: BMW BDC Bench Flashing
(29-09-2019, 03:19 AM)RocketSurgeon Wrote:(28-09-2019, 22:35 PM)paskuale Wrote: I don’t have key of this BDC, so I can’t activate KL15 by key. I load BDC.prg because my ecu is BDC. I have always "Condition not correct" and KL15 is not powered on. I can power on any onther KL30 in the argument list. The only one not working is KL15. Any advice ? Thank you |
|||
05-10-2019, 16:44 PM,
Post: #9
|
|||
|
|||
RE: BMW BDC Bench Flashing
Nobody can help me with BDC bench flashing ?
|
|||
06-10-2019, 20:50 PM,
Post: #10
|
|||
|
|||
RE: BMW BDC Bench Flashing
(05-10-2019, 16:44 PM)paskuale Wrote: Nobody can help me with BDC bench flashing ? You need to have a valid key for the BDC on the emergency coil. If it gives you the conditions not correct error while executing the steuern klemme job it means it did not detect a valid key. If my post was helpful to you please give me a thanks and/or reputation
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
[Solved] G30 EVO on bench with FEM | World L | 3 | 154 |
04-06-2024, 16:13 PM Last Post: World L |
|
Tool for bench read 8hp | Garryq | 10 | 1,956 |
03-06-2024, 20:05 PM Last Post: Vladica |
|
ID8 with BCP on bench, can't turn on ignition | Matthew53 | 1 | 217 |
23-05-2024, 21:39 PM Last Post: Matthew53 |
|
Flashing F26 DME software into F22? | Krysiaman | 4 | 148 |
14-05-2024, 17:40 PM Last Post: ruben_17non |
|
Bmw explorer msd80 isn read out bench? | xMoses | 9 | 850 |
30-04-2024, 01:07 AM Last Post: that4chanhacker |
|
MGU Bench connection | kimz | 4 | 598 |
22-04-2024, 17:06 PM Last Post: kimz |
|
Flashing hybrid cars with E-sys | ravager | 0 | 191 |
18-04-2024, 09:51 AM Last Post: ravager |
|
Test bench Connection to CAN ECU's | HaakonA | 3 | 342 |
03-04-2024, 07:24 AM Last Post: sixcode |
|
Bosch MEVD172H bench backup | mrproper | 1 | 303 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
Flashing a stock box map to an E60 with XHP? | GoNz0- | 10 | 494 |
20-03-2024, 09:33 AM Last Post: tomaxsas |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content