[gt678]

What HW configuration is that ZGW it´ written on the label on it? Low, Medium...?

[hero3838]

What HW configuration is that ZGW it´ written on the label on it? Low, Medium...?

In photo blue label is zgw02 mid today flash only swl with 8sk as photo red label swl ,but same issue flexy ray not work .tomorrow i will triy flash one by one swlies (hlw, btl and other swl stay orginal ).

[hero3838]

Gt678 did you checked .your car how can i do with zgw .i reset flexyray initiations but same have problem with dtc and can not gear engage' press break peadal warning' nad icm not work sport,normal etc.. also cruise control .do you have solution also your car build date before 09-2010 as mine

[gt678]

Now I saw what´s your problem, it´s not the ZGW.
Your car is before 09/2010, where it had an other HW of CAS. Just order a new CAS at BMW and your car will run.
Because of that for cars before 09/2010 I only to such retrofits with the FXX MOST emulator from carsystems because its cheaper than a new ZGW and a new CAS.

[Loliceman]

Now I saw what´s your problem, it´s not the ZGW.
Your car is before 09/2010, where it had an other HW of CAS. Just order a new CAS at BMW and your car will run.
Because of that for cars before 09/2010 I only to such retrofits with the FXX MOST emulator from carsystems because its cheaper than a new ZGW and a new CAS.

This above is absolutely correct. I can confirm this is the reason.
I myself always use Fxx MOST emulator on the older cars to avoid this.

[Jartsa]

Do those FXX most emulators work like nbt was oem in the car or is there custom made menus etc?

[Loliceman]

Do those FXX most emulators work like nbt was oem in the car or is there custom made menus etc?

It works just like normal NBT. All the magic it does is not noticable for the "user".
It is just installed like an extra module in your car, hidden somewhere you choose.

[hero3838]

Yes but you can not code nbt directly in car you have to code it on bench i .now i connect nbt k-can2 line from my orginal zgw01 it works but only rear view camera and side view dont work and some buttun on panel (radio on/off mute ,mode, eject cd, and arrows left right also steering whell control for up down) other all funcuon ok .and i will order kcan to kcan2 bridge i will try with can bridge .most emulator is expensive almost a nbt price 450 euro + shipping .

---

For rear an side view camera i will connect my older radio with only kline and power and i think cameras will works but i think other button will not work if other button not communicating by most ,it will work with can bridge

[Loliceman]

Yes but you can not code nbt directly in car you have to code it on bench i .now i connect nbt k-can2 line from my orginal zgw01 it works but only rear view camera and side view dont work and some buttun on panel (radio on/off mute ,mode, eject cd, and arrows left right also steering whell control for up down) other all funcuon ok .and i will order kcan to kcan2 bridge i will try with can bridge .most emulator is expensive almost a nbt price 450 euro + shipping .

---

For rear an side view camera i will connect my older radio with only kline and power and i think cameras will works but i think other button will not work if other button not communicating by most ,it will work with can bridge

Cameras is because that FBAS wires need to be rerouted according to NBT standards.

[inotherwords]

I'm sorry about bothering you guys, but the topic of this thread is slightly different

@gt678, I tried to search through the internet about E-series CAN commands, but it seems that information is very specific or secret