Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
How to reset 6WB cluster from G-Series?
|
19-06-2023, 10:20 AM,
Post: #1
|
|||
|
|||
|
How to reset 6WB cluster from G-Series?
Can some1 provide a tutorial or maybe give here support?
cheers |
|||
|
|
19-06-2023, 13:33 PM,
Post: #2
|
|||
|
|||
|
RE: How to reset 6WB cluster from G-Series?
What рдят is not clear? read eeprom dump (35128WT or 35160WT should be) dump, adjust mileage or replace with vvdi eeprom (if necessary) delete vin, code to car.
|
|||
|
|
|
19-06-2023, 15:37 PM,
Post: #3
|
|||
|
|||
RE: How to reset 6WB cluster from G-Series?
(19-06-2023, 13:33 PM)muskatas Wrote: What рдят is not clear? read eeprom dump (35128WT or 35160WT should be) dump, adjust mileage or replace with vvdi eeprom (if necessary) delete vin, code to car. g series 6wb has 35128wt NCD / SFA / f5с / KAFAS_G11 OBD ратсн / MRR OBD ратсн / HVS2/SME fїж
EGS7 RESET OBD / EVO/ENTRYNAV2/MGU - CARPLAY / CP REMOVAL Any BMW Remote Coding 5ёяvїcёs - LINK W |
|||
|
|
|
20-06-2023, 02:16 AM,
Post: #4
|
|||
|
|||
|
RE: How to reset 6WB cluster from G-Series?
Hello,
Which are the options, regarding emulator? I have a mini 6WB (35128WT), that needs to be virginized. CGDI prog didnt work... I have seen Yanhua USB+emu, lot advertised at Aliexpress, but I really doubt is a good choice, any other recomendations? Thanks Remote BMW support all series
Coding + Flashing Ecu Validation Coding 2.0 KDS/SecOC/Diag/LCS Immo Solutions f5с/SFA Repair pack Contact if need help |
|||
|
|
|
20-06-2023, 12:21 PM,
Post: #5
|
|||
|
|||
|
RE: How to reset 6WB cluster from G-Series?
6WB have most B05cн instrument panel. There no mileage at incremental zone in B05cн panels ! Just write vin and code to vehicle. Thats all
|
|||
|
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
21-06-2023, 13:15 PM,
Post: #6
|
|||
|
|||
|
RE: How to reset 6WB cluster from G-Series?
same like all other
|
|||
|
|
|
21-06-2023, 14:37 PM,
Post: #7
|
|||
|
|||
|
RE: How to reset 6WB cluster from G-Series?
What kind of programmer do you have? Can you post your EEPROM here
|
|||
|
|
22-06-2023, 07:47 AM,
Post: #8
|
|||
|
|||
|
RE: How to reset 6WB cluster from G-Series?
in fact, I dont have any programmers yet.
I want to buy the right one! Can some1 provide the clear dumps of the 35128WT and 35160WT chips? cheers |
|||
|
|
|
22-06-2023, 08:10 AM,
Post: #9
|
|||
|
|||
RE: How to reset 6WB cluster from G-Series?
(22-06-2023, 07:47 AM)Airbus Wrote: in fact, I dont have any programmers yet. get your programmer or borrow it. Read dump and post it here if you dont know how to virginize. Someone will help you. |
|||
|
|
|
22-06-2023, 12:43 PM,
Post: #10
|
|||
|
|||
RE: How to reset 6WB cluster from G-Series?
(20-06-2023, 12:21 PM)ltujustas Wrote: 6WB have most B05cн instrument panel. There no mileage at incremental zone in B05cн panels ! Just write vin and code to vehicle. Thats all Ok, but wouldn't the BDC read the mileage from cluster if cluster would have higher? Only BMW 5ёяvїcёs:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation f5с pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
