Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Enet-Cable connection?
24-01-2018, 09:18 AM,
Post: #3
|
|||
|
|||
RE: Enet-Cable connection?
(24-01-2018, 08:05 AM)snypertje Wrote: I had it several times after diagnostic with Icom, connecting with Enet-Cable is hard after that. What can cause this problem? When you connect ICOM to a car, the ZGW(FEM-GW/BDC) is given a IP-adress based on your ICOM DHCP setting. What you need to do if you want to quickly swap to a ENET cable is either let the ZGW go to sleep (disconnect ICOM and let it fall asleep 10-20 min) or you could go into ISTA -> Service Functions -> Body, Voltage Supply -> Send power down command Then you only have to wait 2-3 minutes for the car to fall asleep. Please, Press the Buttons and if you feel that this post helped you!
|
|||
Reputation: +1 - Bimmer540 [+1] | |||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Enet-Cable connection? - by Bimmer540 - 24-01-2018, 08:05 AM
RE: Enet-Cable connection? - by Nackapatz - 24-01-2018, 09:12 AM
RE: Enet-Cable connection? - by Bimmer540 - 24-01-2018, 09:43 AM
RE: Enet-Cable connection? - by Nackapatz - 24-01-2018, 14:51 PM
RE: Enet-Cable connection? - by Loliceman - 24-01-2018, 09:18 AM
RE: Enet-Cable connection? - by masa52 - 24-01-2018, 09:49 AM
RE: Enet-Cable connection? - by Gregor - 24-01-2018, 10:25 AM
RE: Enet-Cable connection? - by masa52 - 24-01-2018, 13:29 PM
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Motorrad esys coding using ENET and ICOMD cable | bennymx | 17 | 2,993 |
09-05-2024, 11:20 AM Last Post: Vojno |
|
MGU Bench connection | kimz | 4 | 570 |
22-04-2024, 17:06 PM Last Post: kimz |
|
Carplay loses connection | marcospoffo | 2 | 289 |
19-04-2024, 19:44 PM Last Post: marcospoffo |
|
BMW Remote ENET | B O S S | 11 | 1,374 |
06-04-2024, 17:38 PM Last Post: Jalami |
|
SSH Connection Failure on NBT - Initialize HDD | Billyjoe69 | 3 | 239 |
05-04-2024, 07:07 AM Last Post: RuleNormaliai |
|
Test bench Connection to CAN ECU's | HaakonA | 3 | 330 |
03-04-2024, 07:24 AM Last Post: sixcode |
|
ISTA D and P cable, a good one | ac427 | 3 | 290 |
02-04-2024, 14:23 PM Last Post: ac427 |
|
FEM Not working with ENET but works wtih DCAN | armenh7 | 2 | 317 |
01-04-2024, 20:21 PM Last Post: armenh7 |
|
I020 esys connection issue | mcrussell | 6 | 345 |
25-03-2024, 23:35 PM Last Post: vanos |
|
E-Sys and direct ecu connection PASS_THRU | lacost | 2 | 246 |
18-03-2024, 18:38 PM Last Post: VroomVroom |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content