Possibly Related Threads…

***lustek*** · 28-09-2019, 02:47 AM,

My icom clone have always fault aboute fan and wlan.
I do aboute 200 cars with it and nothing happens - errors was from the beginning.
But if there is firmware version that exclude fan i will try. Is there any option to remove wlan fault too?

Can you show me in with eeprom i must change serial number?

***ferrum*** · 28-09-2019, 11:17 AM,

Post 64
detailed instructions

***eltonnallb*** · 28-09-2019, 19:39 PM,

Hello Friends anyone help me for the icom a2 terminal 15 is 0 volts have anyone any ideas or scheme how to find and fix this problem

***Euro Service*** · 09-10-2019, 15:48 PM,

(14-09-2019, 07:07 AM)ferrum Wrote: The simplest thing you can try is to restore the firmware. Sometimes it helps. If the button does not work for you, then check if it is disabled.

its working but red blinking stil flashing, i try to test fan still error...any suggested to repair red blinking??
tks

***ferrum*** · 09-10-2019, 21:58 PM,

Did you connect a fan?
Did the fan spin?
I showed a photo of connecting a fan with a speed sensor.

***Euro Service*** · 10-10-2019, 19:11 PM,

(09-10-2019, 21:58 PM)ferrum Wrote: Did you connect a fan?
Did the fan spin?
I showed a photo of connecting a fan with a speed sensor.

yes i connect a fan, its spin for first i connect icom after that fan stop spin and still got fan test error

***Stiffmaster*** · 10-10-2019, 20:39 PM,

(30-08-2019, 10:25 AM)ferrum Wrote: This can be easily understood by looking at the datasheet mega16.
ICOM has a very complex power scheme with PWM.

Hi,
I studied the datasheet of the mpc5200b now.
It's impossible to get access to the Avdd-Pin - it's in the third row, so no change without desoldering the processor.
Is there somewhare an simply accessable measurement point for checking power supply?

Br
Stiffi

***ferrum*** · (This post was last modified: 10-10-2019, 23:37 PM by ferrum.)

You have a problem in mega16
I can give a breakpoint if it is available but you do not understand me.

***Stiffmaster*** · 15-10-2019, 16:56 PM,

(10-10-2019, 23:22 PM)ferrum Wrote: You have a problem in mega16
I can give a breakpoint if it is available but you do not understand me.

Thanks.
Running again wink

Solution was a lot of contact spray for the mega16

I was always looking for the main processor but with your last post, I double checked and found mega16 fail

Many many thanks!

Br
Chris

***tictach*** · (This post was last modified: 18-10-2019, 05:29 AM by tictach.)

Hi all .. anyone have icom a2 24c02 eeprom file . my icom leeds red al time and can not restor . read out 24c02 and se some hex missing comparing hex to picture i found.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	F10 FRM III eeprom needed for repair	claw	0	67	19-04-2024, 16:16 PM Last Post: claw
	[MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS	hashtagmaster	105	36,075	17-04-2024, 18:36 PM Last Post: hashtagmaster
	ICOM Firmware (NEXT & A2) always current!	Vojno	206	43,304	12-04-2024, 23:36 PM Last Post: bennymx
	Poor wifi signal from new ICOM's	bmchicago	3	326	12-04-2024, 18:55 PM Last Post: Node
	FSC Repair pack loading G07	pauliuszo	0	81	09-04-2024, 04:58 AM Last Post: pauliuszo
	Solved ✔ ICOM NEXT Error	bmwcare	4	2,491	01-04-2024, 11:34 AM Last Post: ivanp
	G01 FSC repair pack needed	mmihai82	2	318	01-04-2024, 10:05 AM Last Post: mmihai82
	CCC flash WINKFP ICOM	BimmerSLO	9	369	29-03-2024, 19:17 PM Last Post: Hoborg
	For anyone having problem with ICOM NEXT FW update via ISTA+.	ImmBoo	16	4,296	24-03-2024, 11:29 AM Last Post: Twointje
	Request KAFAS FSC repair pack	miru75	74	8,523	23-03-2024, 17:50 PM Last Post: radeeek17

Contact Us