Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F31 enet connection issue.
13-02-2022, 16:11 PM,
Post: #21
|
|||
|
|||
RE: F31 enet connection issue.
|
|||
13-02-2022, 17:34 PM,
(This post was last modified: 14-02-2022, 20:36 PM by morto.)
Post: #22
|
|||
|
|||
RE: F31 enet connection issue.
Hi, again. I done battery reset. Now was able to connect and read car with enet and ISTA 4.31.40, but read speed is very low. With older version Ista 3.47 was possible to see vin and ip and after setup connection ista say check connection and ignition on. With D can cable connection is faultless with both versions ISTA. Maybe need another enet for f3x?
|
|||
13-02-2022, 17:52 PM,
Post: #23
|
|||
|
|||
RE: F31 enet connection issue.
ENET cable is all the same.
Difference is, Marketing, Price and something for your eyes. Unfortunately, if you don't understand it, we can't help you. If my post helped you hit the thanks and reputation button. Thank you.
|
|||
13-02-2022, 19:52 PM,
Post: #24
|
|||
|
|||
RE: F31 enet connection issue.
This is BMW ENET cable and only different with the after market cable is high quality material used, just a resistor and gold spring loaded pins. See the pictures.
The different processing is your PC hardware not the cable. |
|||
14-02-2022, 07:31 AM,
Post: #25
|
|||
|
|||
RE: F31 enet connection issue.
(13-02-2022, 19:52 PM)2013m5 Wrote: This is BMW ENET cable and only different with the after market cable is high quality material used, just a resistor and gold spring loaded pins. See the pictures. Well, naturally the cable itself (Ethernet) makes something, if it is VERY bad quality. then, I assume, ethernet packets have to send multiple times because checksum erros. But this is only when cable quality is very bad. |
|||
14-02-2022, 08:07 AM,
Post: #26
|
|||
|
|||
RE: F31 enet connection issue.
I have seen this problem before. Had a car that would take 30min to scan and sometimes all modules would be offline. Never got to resolve it but I suspected an issue with gateway. It would also take very very long if car had many errors. Same cable and computer on another car was fine. So the issue is specific to certain cars. Maybe try update the car and see.
If you find a solution I will be interested. |
|||
14-02-2022, 20:46 PM,
(This post was last modified: 14-02-2022, 20:48 PM by morto.)
Post: #27
|
|||
|
|||
RE: F31 enet connection issue.
(14-02-2022, 08:07 AM)willisodhiambo Wrote: If you find a solution I will be interested. For now solution is to use DCan cable 3x faster reading than enet connection. I'm considering an update, because the i-step is from 2013. I have recall appointment for steering rack bolts, maybe will ask for software update. |
|||
14-02-2022, 21:04 PM,
Post: #28
|
|||
|
|||
RE: F31 enet connection issue.
Try to set ediabas to zgw ip, then config ista to work with ediabas conf. I have faced same behavior with enet, but doing the above make it work
|
|||
14-02-2022, 21:28 PM,
Post: #29
|
|||
|
|||
RE: F31 enet connection issue.
(13-02-2022, 14:48 PM)user_530d Wrote: No. It can never be faster. Technical impossible.Theoretically it is possible. If the cable is so bad that many Ethernet packets have CRC errors, they needs to be re transmitted and that will cost time. If you have a very cheap and long cable, and a crappy switch, then the Ethernet adapter might make a difference in the number of CRC errors and hence the perceived "speed". But in that case you should just buy decent Ethernet cables instead of fancy adapters. Ethernet error counters should always stay 0 on your laptop / switch. |
|||
15-02-2022, 12:34 PM,
Post: #30
|
|||
|
|||
RE: F31 enet connection issue.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Motorrad esys coding using ENET and ICOMD cable | bennymx | 17 | 2,932 |
09-05-2024, 11:20 AM Last Post: Vojno |
|
NBT ID4 to ID6 issue with FSC | Driss2 | 7 | 295 |
30-04-2024, 08:02 AM Last Post: stydly |
|
Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 687 |
23-04-2024, 07:44 AM Last Post: It3_Magic |
|
MGU Bench connection | kimz | 4 | 533 |
22-04-2024, 17:06 PM Last Post: kimz |
|
Carplay loses connection | marcospoffo | 2 | 266 |
19-04-2024, 19:44 PM Last Post: marcospoffo |
|
TMS FRM3 F10 Coding issue | mj_mj_mj | 17 | 2,017 |
16-04-2024, 09:30 AM Last Post: user_530d |
|
BMW Remote ENET | B O S S | 11 | 1,329 |
06-04-2024, 17:38 PM Last Post: Jalami |
|
BMW G32 6 GT - Central Lock Issue | DaBotta | 3 | 197 |
06-04-2024, 07:44 AM Last Post: Volum |
|
SSH Connection Failure on NBT - Initialize HDD | Billyjoe69 | 3 | 233 |
05-04-2024, 07:07 AM Last Post: RuleNormaliai |
|
Test bench Connection to CAN ECU's | HaakonA | 3 | 324 |
03-04-2024, 07:24 AM Last Post: sixcode |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content