Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F20 ELV issues
24-05-2023, 19:55 PM,
Post: #1
|
|||
|
|||
F20 ELV issues
Hi,
I`ve got some issues with FEM and ELV on F20 2011. I sorted FEM no probs, but ELV needs to be virginised. I`ve tried to read original ELV I thought maybe just needs reprogramming, eeprom M95040 with Hexprog using a clip, but it doesn`t read, connection issues, etc. cleaned legs still the same. Ok I thought the chip is dead, then I bought another 3 ELV units, but they are all the same. has anyone ever experienced any difficulties to read these eeproms? I thought its my Hexprog or clip faulty, but it reads FEM 95128s without issues. I`ve tried VVDI Prog too, no difference. Any ideas? |
|||
24-05-2023, 20:19 PM,
Post: #2
|
|||
|
|||
RE: F20 ELV issues
Why not desoldering the eeprom?
All my knowledge is free for exchange with valuable information
Sharing->Development
|
|||
25-05-2023, 07:35 AM,
Post: #3
|
|||
|
|||
RE: F20 ELV issues
Hexpro is not really good to read this eeprom. The easiest way to read it you need to desolder this chip.
• EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
30-05-2023, 12:03 PM,
Post: #4
|
|||
|
|||
RE: F20 ELV issues
Desoldering eeprom from elv and put here i virginise for you
I help you please rate and thank you.
|
|||
30-05-2023, 14:49 PM,
Post: #5
|
|||
|
|||
RE: F20 ELV issues
|
|||
31-05-2023, 18:30 PM,
Post: #6
|
|||
|
|||
RE: F20 ELV issues
(30-05-2023, 14:49 PM)BmwMerc Wrote:(30-05-2023, 12:03 PM)Gabriel87 Wrote: Desoldering eeprom from elv and put here i virginise for you Is it maybe possible that you share the virign ELV dump ? See YA
|
|||
28-11-2023, 20:06 PM,
Post: #7
|
|||
|
|||
RE: F20 ELV issues
Hello can someone help/guide me please.
I had to use a second hand F20 FEM and all coded and car started all fine. However seems that steering is locked due to ELV. How to virginise ELV I have the eeprom dump file. Can someone help to virginise please? Thank you. |
|||
28-11-2023, 21:07 PM,
Post: #8
|
|||
|
|||
RE: F20 ELV issues
(28-11-2023, 20:06 PM)v8cylinder Wrote: Hello can someone help/guide me please.Post Eep here i will do it |
|||
28-11-2023, 21:19 PM,
Post: #9
|
|||
|
|||
RE: F20 ELV issues
(28-11-2023, 21:07 PM)Romulus Wrote:(28-11-2023, 20:06 PM)v8cylinder Wrote: Hello can someone help/guide me please.Post Eep here i will do it Thank you, do you need eeprom file that i got from FEM? Or a different one? Sorry its my first time dealing with F series manual ELV. The file does not attach here, can I PM you? |
|||
28-11-2023, 21:22 PM,
Post: #10
|
|||
|
|||
RE: F20 ELV issues
(28-11-2023, 21:19 PM)v8cylinder Wrote:ELV(28-11-2023, 21:07 PM)Romulus Wrote:(28-11-2023, 20:06 PM)v8cylinder Wrote: Hello can someone help/guide me please.Post Eep here i will do it |
|||
Reputation: +1 - v8cylinder [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content