Advanced Search
Hello There, Guest! Login — Register
Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Programming KOMBI and NBT fails on F series
16-07-2016, 08:49 AM,
Post: #121
bmw335coding Offline
Donator
******
Donators 		Posts: 521
Threads: 100
Threads: 100
Thanks Received: 89 in 76 posts
Thanks Given: 219
Joined: May 2016
Reputation: 15
RE: Programming KOMBI and NBT fails on F series
Has anyone try to give the ICOM a static IP-Adress in the same subnet like the notebook and use the newest ISTA-P?
If my post helped you hit the thanks and reputation button. handshakehandshakehandshake

BMW F32 435d xDrive Coupe 12/2016 - Stage 2 drivedrivedrive
609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot
Retrofits:
6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning
+
Yamaha R6 RJ09 10/2004 - Stage 1 bikerbikerbiker
Quote this message in a reply
16-07-2016, 16:06 PM,
Post: #122
jaramillo Offline
Donator
******
Donators 		Posts: 877
Threads: 145
Threads: 145
Thanks Received: 522 in 253 posts
Thanks Given: 384
Joined: Aug 2015
Reputation: 167
RE: Programming KOMBI and NBT fails on F series
(16-07-2016, 08:49 AM)bmw335coding Wrote:  Has anyone try to give the ICOM a static IP-Adress in the same subnet like the notebook and use the newest ISTA-P?

Take a look to my post

http://cartechnology.co.uk/showthread.ph...#pid168398
Quote this message in a reply
16-07-2016, 16:27 PM,
Post: #123
bmw335coding Offline
Donator
******
Donators 		Posts: 521
Threads: 100
Threads: 100
Thanks Received: 89 in 76 posts
Thanks Given: 219
Joined: May 2016
Reputation: 15
RE: Programming KOMBI and NBT fails on F series
(16-07-2016, 16:06 PM)jaramillo Wrote:  
(16-07-2016, 08:49 AM)bmw335coding Wrote:  Has anyone try to give the ICOM a static IP-Adress in the same subnet like the notebook and use the newest ISTA-P?

Take a look to my post

http://cartechnology.co.uk/showthread.ph...#pid168398

my question was about STATIC IPv4, without dhcp-soft or router.
If my post helped you hit the thanks and reputation button. handshakehandshakehandshake

BMW F32 435d xDrive Coupe 12/2016 - Stage 2 drivedrivedrive
609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot
Retrofits:
6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning
+
Yamaha R6 RJ09 10/2004 - Stage 1 bikerbikerbiker
Quote this message in a reply
06-08-2016, 08:20 AM,
Post: #124
Terabyte Offline
Member
Members 		Posts: 32
Threads: 0
Threads: 0
Thanks Received: 0 in 0 posts
Thanks Given: 12
Joined: Nov 2015
Reputation: 0
RE: Programming KOMBI and NBT fails on F series
I think it´s still a bug in ISTA P
Quote this message in a reply
07-08-2016, 03:12 AM,
Post: #125
winter Offline
VIP Donator
******
VIP Donators 		Posts: 290
Threads: 38
Threads: 38
Thanks Received: 722 in 80 posts
Thanks Given: 703
Joined: May 2015
Reputation: 355
XZBMW  RE: Programming KOMBI and NBT fails on F series
(16-07-2016, 16:27 PM)bmw335coding Wrote:  
(16-07-2016, 16:06 PM)jaramillo Wrote:  
(16-07-2016, 08:49 AM)bmw335coding Wrote:  Has anyone try to give the ICOM a static IP-Adress in the same subnet like the notebook and use the newest ISTA-P?

Take a look to my post

http://cartechnology.co.uk/showthread.ph...#pid168398

my question was about STATIC IPv4, without dhcp-soft or router.

Please totally read jaramillo's post for "ICOM Config",and try it,you will find your need.and thanks jaramillo.
Quote this message in a reply
08-08-2016, 10:03 AM,
Post: #126
rafi-88 Offline
Donator
******
Donators 		Posts: 166
Threads: 19
Threads: 19
Thanks Received: 235 in 34 posts
Thanks Given: 78
Joined: Nov 2013
Reputation: 45
RE: Programming KOMBI and NBT fails on F series
(16-07-2016, 16:27 PM)bmw335coding Wrote:  my question was about STATIC IPv4, without dhcp-soft or router.

I have set ICOM and Laptop to static IPV4 and was naver had this issue.
Quote this message in a reply
[+] 2 users say Thank You to rafi-88 for this post
19-08-2016, 20:43 PM,
Post: #127
delete Offline
Member
Members 		Posts: 47
Threads: 4
Threads: 4
Thanks Received: 3 in 3 posts
Thanks Given: 19
Joined: Feb 2016
Reputation: 1
RE: Programming KOMBI and NBT fails on F series
Hey,

after reading this thread several times, I'm really confused right now. I basically understand why there could be problems (ecu not reachable because of missing address).
What I do not get is, what is the best way to go?
1. Use local installed DHCP Server App
2. Use router which has an DHCP Server enabled
3. Configure static IP-Adress to ICOM Next and Computer

Also I ask myself if I should flash the ecu with ISTA-P or E-SYS? I have the feeling using ISTA-P is the safest way to go?!?
Also is it best to flash ecus one by one or is it fine to flash the whole car at once?
BTW I want to flash a F22 with NBT Headunit. No NBT evo.
Quote this message in a reply
12-12-2016, 12:11 PM,
Post: #128
inspi1981 Offline
VIP Member
******
VIP Members 		Posts: 889
Threads: 118
Threads: 118
Thanks Received: 4,698 in 360 posts
Thanks Given: 172
Joined: Feb 2014
Reputation: 2,413
RE: Programming KOMBI and NBT fails on F series
(27-06-2016, 01:19 AM)jaramillo Wrote:  Hi everyone,

I want to share my configuration that worked flawless:

First of all the ICOM should be configured this way:

ICOM Config

ConnectionMode = STATIC_IP
Ip = 192.168.68.85
Netmask = 255.255.255.0
Gateway = 192.168.68.99

DHCPSRV.INI

[SETTINGS]
IPPOOL_1=192.168.68.1-254
IPBIND_1=192.168.68.99
AssociateBindsToPools=1
Trace=1
DeleteOnRelease=0
ExpiredLeaseTimeout=3600

[GENERAL]
LEASETIME=86400
NODETYPE=8
SUBNETMASK=255.255.255.0
NEXTSERVER=192.168.68.99
ROUTER_0=192.168.68.1

[DNS-SETTINGS]
EnableDNS=0

[TFTP-SETTINGS]
EnableTFTP=0
ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot
WritePermission=0

[HTTP-SETTINGS]
EnableHTTP=0
ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot
[00-01-A9-00-EE-E9]
IPADDR=192.168.68.1
AutoConfig=06/26/2016 12:41:32
Hostname=ICOM1120134
LeaseEnd=1467070189

Windows Ethernet config:

"Use the following IP Address"
IP 192.168.68.99
Subnet mask 255.255.255.0


Hope this help

Thanks, works perfect. Did NBT with ISTA-P and ICOM A2 yesterday without any issue


Attached Files Thumbnail(s)
   
Quote this message in a reply
18-12-2016, 15:24 PM,
Post: #129
Marox
Unregistered
 		 
RE: Programming KOMBI and NBT fails on F series
(12-12-2016, 12:11 PM)inspi1981 Wrote:  
(27-06-2016, 01:19 AM)jaramillo Wrote:  Hi everyone,

I want to share my configuration that worked flawless:

First of all the ICOM should be configured this way:

ICOM Config

ConnectionMode = STATIC_IP
Ip = 192.168.68.85
Netmask = 255.255.255.0
Gateway = 192.168.68.99

DHCPSRV.INI

[SETTINGS]
IPPOOL_1=192.168.68.1-254
IPBIND_1=192.168.68.99
AssociateBindsToPools=1
Trace=1
DeleteOnRelease=0
ExpiredLeaseTimeout=3600

[GENERAL]
LEASETIME=86400
NODETYPE=8
SUBNETMASK=255.255.255.0
NEXTSERVER=192.168.68.99
ROUTER_0=192.168.68.1

[DNS-SETTINGS]
EnableDNS=0

[TFTP-SETTINGS]
EnableTFTP=0
ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot
WritePermission=0

[HTTP-SETTINGS]
EnableHTTP=0
ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot
[00-01-A9-00-EE-E9]
IPADDR=192.168.68.1
AutoConfig=06/26/2016 12:41:32
Hostname=ICOM1120134
LeaseEnd=1467070189

Windows Ethernet config:

"Use the following IP Address"
IP 192.168.68.99
Subnet mask 255.255.255.0


Hope this help

Thanks, works perfect. Did NBT with ISTA-P and ICOM A2 yesterday without any issue


Hello,
The settings also work with ISTA + 4.X.X

regardshappy
Quote this message in a reply
19-12-2016, 10:05 AM,
Post: #130
bmsolution Offline
Donator
******
Donators 		Posts: 2
Threads: 0
Threads: 0
Thanks Received: 0 in 0 posts
Thanks Given: 2
Joined: Dec 2015
Reputation: 0
Programming KOMBI and NBT fails on F series
Hello

I have the same problem. This settings do not help me. I have an original bmw icom next and an icom a2(china)


Gesendet von iPhone mit Tapatalk
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  How to code hands free driver assistant (G-series) btvaleks 21 5,643 14-05-2024, 07:27 AM
Last Post: btvaleks
XZBMW using Inpa for f series hero3838 1 157 07-05-2024, 04:26 AM
Last Post: Stratofortress
  F25 5AS,8th and 5AC coding with 6wb kombi simplextibi 1 92 04-05-2024, 06:37 AM
Last Post: Stratofortress
  dissable RDC on G series ? xMoses 6 261 02-05-2024, 08:48 AM
Last Post: Node
  BMW F40 (1 series) no FZD module Ibrahim24 5 200 01-05-2024, 19:27 PM
Last Post: Siki78
XZBMW G12 used Kombi 35128WT palapas1974 14 597 29-04-2024, 17:54 PM
Last Post: johann74270
XZBMW E60 M5 KOMBI cruise control bmwfnatic 4 201 29-04-2024, 09:51 AM
Last Post: bmwfnatic
XZBMW Difference 677 vs. 688 F series ? AlpinWeiss2k18 8 478 16-04-2024, 19:55 PM
Last Post: sebastianfernandes
  Making F-series combox work in e-series Ryn079 5 654 11-04-2024, 15:03 PM
Last Post: wrp_199
XZBMW Lost Navigation - aircon wont turn off 2016 BMW 2 series DannyDans435 6 300 08-04-2024, 08:45 AM
Last Post: painsage

Forum Jump:


Users browsing this thread:
5 Guest(s)

Return to TopReturn to Content