Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
Fob not working remotely after FEM ISN change
|
22-09-2023, 16:03 PM,
Post: #1
|
|||
|
|||
|
Fob not working remotely after FEM ISN change
So guys рдят 3 of my trouble with this car,
After setting donor ecu isn to FEM, had to do fresh immo, so add new keys, I added new key, sucesful, car start but only when holding key close to the steering column, no lock/циLoск. New battery in fob etc. I tried 2 different new keys, also original key virgin and reapply, nothing. Decided to try different FEM, even changed frequency from 434 to 868 and added another key, still same. ANy ideas? tools: ACDP and CGDI |
|||
|
|
22-09-2023, 18:41 PM,
Post: #2
|
|||
|
|||
|
RE: Fob not working remotely after FEM ISN change
90% of the tools cant refresh 434 keys correctly
|
|||
|
|
22-09-2023, 18:49 PM,
Post: #3
|
|||
|
|||
|
RE: Fob not working remotely after FEM ISN change
I agree, in my experience original keys virgined don't work remotely. Use new blank keys from trusted source.
|
|||
|
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
22-09-2023, 19:13 PM,
Post: #4
|
|||
|
|||
|
RE: Fob not working remotely after FEM ISN change
send me which huff key u have and i will send u corresponding files to virgin with
|
|||
|
|
|
23-09-2023, 02:38 AM,
Post: #5
|
|||
|
|||
|
RE: Fob not working remotely after FEM ISN change
i5тд has a procedure where you can test antennas, have you checked it ?
|
|||
|
|
|
14-08-2026, 15:53 PM,
Post: #6
|
|||
|
|||
|
RE: Fob not working remotely after FEM ISN change
[citation = « Mwahab » pid='642556' chronologie='1695408100']
90 % des outils ne peuvent pas rafraîchir correctement 434 touches [/citation] hello Which tool is capable of properly resetting these 433 MHz units to a virgin state? Soft import extract PSDZ Data
https://cartechnology.co.uk/showthread.php?tid=108169 I hope I helped you |
|||
|
|
|
16-08-2026, 11:06 AM,
Post: #7
|
|||
|
|||
RE: Fob not working remotely after FEM ISN change
(14-08-2026, 15:53 PM)johann74270 Wrote: [citation = « Mwahab » pid='642556' chronologie='1695408100'] MK3 is good -Secure Coding NCD 2.0, SFA, SecOC, Certificate Validation CBB
-MRR, RAM, BDC, BCP, Kombi Live Cockpit, Kafas2, Kafas4, SLI, LDW, LCW... Remotely via OBD -EGS ISN F/G series, DKG1/DKG2, 6HP/8HP, 7DCT300, EGS7 Remotely via OBD -DME/DDE ISN MDG1, EDC16, EDC17, MEVD17xx, MSVxx, MSDxx Remotely via OBD -CAS1, CAS2, CAS3, CAS4 -MGU Carplay Android Auto with/without ATM(6AE) Remotely via OBD -Wifi port retrofit EntryNav2 Enavevo -BMW Mini flash iD4 to iD6, Carplay activation Remotely via OBD -ратсн OBD Remotely MGU, CIC, NBT, NBT Evo iD4 iD5 iD6 EntryNav2(EnavEvo), full f5с set, remove Component Protection(CP) -EGS Alpina Flash tune Remotely via OBD -Fxx GTS/CS Flash tune Remotely via OBD -Gxx M2 M3 M4 to CS software update 530HP 650NM, OPF FAP delete Remotely via OBD and more... Whatsapp: Send PM first |
|||
|
|
|
16-08-2026, 14:59 PM,
Post: #8
|
|||
|
|||
|
RE: Fob not working remotely after FEM ISN change
The EEPROM you read out must be put into the same FEM. You not use the original EEPROM in the donor unit
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
