[Bmw325x]

i have problems to update icom A2 Clone FW to 03-22-11
i have never problems before with updating the icom firmware
in the updatelog see this error

2023-10-09T23:32:12 info 390 Can't open temporary flag file /tmp/bootimg for reading
2023-10-09T23:32:12 info 390 Can't open temporary flag file /tmp/appimg for reading

uploading the firmware normal, after the reboot the icom system led blinks permanently and the LAN led is on and blinks

03-22-11 is fw for icom next

[DayvG]

i have problems to update icom A2 Clone FW to 03-22-11
i have never problems before with updating the icom firmware
in the updatelog see this error

2023-10-09T23:32:12 info 390 Can't open temporary flag file /tmp/bootimg for reading
2023-10-09T23:32:12 info 390 Can't open temporary flag file /tmp/appimg for reading

uploading the firmware normal, after the reboot the icom system led blinks permanently and the LAN led is on and blinks

03-22-11 is fw for icom next

I'm pretty sure its not mate 

03-22-11 ICOM
04-22-11 ICOM Next

[Bimmer540]

actual ICOM Firmware (NEXT / A2)
https://cartechnology.co.uk/showthread.p...m+firmware

/A2 interface:

  - BMW_ISPI_ICOM-FW_03-15-09.msi

[kimz]

i have problems to update icom A2 Clone FW to 03-22-11
i have never problems before with updating the icom firmware
in the updatelog see this error

2023-10-09T23:32:12 info 390 Can't open temporary flag file /tmp/bootimg for reading
2023-10-09T23:32:12 info 390 Can't open temporary flag file /tmp/appimg for reading

uploading the firmware normal, after the reboot the icom system led blinks permanently and the LAN led is on and blinks

03-22-11 is fw for icom next

I'm pretty sure its not mate 

03-22-11 ICOM
04-22-11 ICOM Next

Right

Information about the new versioning

The predecessor version to ICOM A firmware 03-22-11 is 03-15-09
The predecessor version to ICOM Next A firmware 04-22-11 is 03-15-08

The meaning of the numbers is as follows:
The first two-digit number indicates the target device of the firmware:
03 for ICOM A
04 for ICOM Next A

The second two-digit number indicates the year the firmware was created:
22 for the year 2022
The third number is the version number of the firmware:
10 - 19 for the first major release
20 - 29 for the second major release

Official bmw info

[Vojno]

Updated / clarified information in the first post!

[Bimmer540]

Good evening friends month also I have the same problem with ista-d 4.32.15 and icom next orginal firmware 3.15.08 the icom it is well detected by the network card of the pc and itool radar and in ista but it is not not detect car computers.
I tested with three icoms and three deferent PCs and deferent cars.
and all icom works fine under ista-d 4.31.40

I had a problem in the adapter settings of the network card. I ran the Windows troubleshooting option (diagnostics) over the network card and after that the ICOM was recognized again in ISTA+. The IP had also changed from 169.254.xxx.xxx to 192.168.xxx.xxx. I think it is related to the DHCP server in the network card option. Maybe you have stored a fixed DHCP server or a fixed IP address in the TCP/IP4 protocol of your network card?

As I said, let the Windows diagnostics run over your network card.

Hallo, i had similar problems and ran network diagnostics with sucsess clapping. Thank you for the hint.

Greetings Lightred

How to do thes steps?

[spiridon]

Hi please i use original icom next with 4.22.11 firmware version.
I tried to use my original icom next with ista-d 4.33.30 but appear state "Firmware"
I installing the BMW_ISPI_ICOM-Next-FW_03-15-08 and i tried to update the firmware from icom next
via ista-d but i can't, enter to  ICOM Configuration Manager.

Please how can use my original icom next with ista-d 4.33.30 ?

Many thanks in advance.

[Diagmaister]

Is this the latest?

[Bimmer540]

Is this the latest?

Yes.....

[Sanyi85]

Hi please i use original icom next with 4.22.11 firmware version.
I tried to use my original icom next with ista-d 4.33.30 but appear state "Firmware"
I installing the BMW_ISPI_ICOM-Next-FW_03-15-08 and i tried to update the firmware from icom next
via ista-d but i can't, enter to  ICOM Configuration Manager.

Please how can use my original icom next with ista-d 4.33.30 ?

Many thanks in advance.

Download the LINK: 4.22.11 firmware.msi and install to your computer.
After the ISTA don't show the "FIRMWARE" to your ICOM!