Here is I am practising with WїиоL5 concerning the blocking of the gate egr on a dump of try(essay) resulting(coming) from one 307 edc16c34.
I heard of switch for the egr but when I compare the dump of origin with a dump egr got deleted by volta I does not see the switch.
Somebody can he(it) enlighten me please.
The dump of origin with the dump egr got deleted by volta as attachment.

Attached Files

PEUGEOT 307 1600 HDI 110CV EDC16C34_1037371084_Cks_6C3D ORI.rar
File Type:
Downloaded:	38 times
Size:	51.44 KB

Hello All,
I have recently installed Honda нD5 3.012.030 by TizWaz and all went well. I Use a Twin board HIM Module and employed the files by TizWaz . The Software works great . I also Used the Honda /Acura Keycode gёиёяатоя and Registered it with out any problems .
Next I connected to a Jazz and could get to the stage where I could register Keys if Necessary-attempt 1 . ALL GOOD so far
I then connected to a CRV 2008 with only one key and unfortunately the system told me it was Attempt 28!!!Outside the (1-25) attempts of the gёиёяатоя.
My question is ;-
Is there a way to reset the immobiliser system so that It can read 0 so I can register a key ?????????? by using the Honda /Acura Code gёиёяатоя.

Thanks in anticipation.

Hey friends
i have AUDI S3 2008 2.0 TFSI ECU edc16
i need to increase it power .i want it 320ph
any one can help plz ?

this is my orig fiel

Attached Files

ECU AUDI S3 2008 ORI.rar
File Type:
Downloaded:	19 times
Size:	817.49 KB

I see that the NBT Europe 2014-2 maps are available on some nasty, competing, sites. Can anyone post a тояяёит link to the files?

Help me to put 39750KM,attached dump

Attached Files

MILEAGE.rar
File Type:
Downloaded:	24 times
Size:	148 bytes

Hello all,
is that a kind soul could change me to dump 0 kms
thank you in advance.

Attached Files

406 coupe original m.rar
File Type:
Downloaded:	20 times
Size:	547 bytes

Hi guys,

Thanks in advance for reading this topic.

I'm quite new in this forum and wanted to start doing something. I think I have downloaded all the software needed for generating my codes for a Navigation map upgrade.

So as far as I understood my main steps are:

1.- get my 1b/de file from the car (using the ODB2 - Ethernet cable and SWID reader). I am not sure which software is needed below the SWID reader, since it references ёdїдbд5 folder to replace some prg files.

I already set up ё_5у5 (even I don't know if it is required for my purposes).

2.- Use NBT.exe and the file generated in the previous step in order to build the final code (after b64 decoding the 1b/de file).

Are my assumptions right?
Any advice, guide or document to follow?

I already tried to search the forum, but as I'm quite new to the forum and these technologies its getting hard to perform the right search.

Regards,

UpdateDB 7.44 to 7.47 ( scary01 )

I grieve see it of scary. me the ais abolish

NO PASSWORD Who need help

BMWhat v12.08 FULL
Description
Advanced car dїдgиo5тїc App for BMW cars
The only specific dїдgиo5тїc tool for BMW on Android!
With this app you can read out fault codes like the ёxpёятs.
While OBD Readers are limited to a small number of electronic control units (ECUs) and even a smaller number of fault codes, this app reads out practically all compatible ECUs.
Normally this is only possible with very expensive ёxpёят equipment.
Now you can check your car yourself in-depth!
It provides modell specific fault code explanations.
...and you can even clear the stored manufacturer DTC fault codes - not just OBD!
Main features are:
- Perform selected in-depth fault analysis
- Provide model specific text explanation of fault code
- Send the analysis protocol per email
- Clear DTC fault codes
- Codings with many possibilities
- Engine parameter monitoring for many engines
Since this is a rather complex issue, not all cars may respond to the specific commands sent over Bluetooth adapters.
Please just try the free version to see if your car is being supported BEFORE purchasing the full version
And please let us know your experience by sending email to [email protected]
Compatibility
The following BMW models were successfully tested:
1er: E81, E87
1er Convertible: E88
1er Coupe: E82
3er: E90
3er Touring: E91
3er Coupe: E92
3er Convertible: E93
5er: E60
5er Touring: E61
6er: E63
6er Convertible: E64
7er: E65, E66
X3: E83
X5: E70
X6: E71, E72
MINI
E46, E39 and other older models- only with our USB-OBD cable on USB-OTG!
F-Modelle

Experience shows that one would expect the above models to be compatible.
*** However please test the compatibility with the free lite version BEFORE buying the full version. ***
This app is specifically for BMW models - it is not an app by BMW itself

What's New
Added new engine parameters
Coding:
Added Cabriocodings (CTM)
Voltage monitoring for more bulbs (FRM)

I want to share with my forum friends!!!
PLS hit thanks if you like it!
Enjoy!

Attached Files

Thumbnail(s)
   

REMOVE DPF OFF FAP OFF, EGR OFF, Immo OFF Lambda Cat OFF

best software to remove and disable dpf egr immo

password is in txt doc.

Attached Files

Remove DPF EGR IMMO.txt
File Type:
Downloaded:	873 times
Size:	117 bytes

NO Password who need help

Hi guys I'm new here.

I have a Renault Laguna II (2002, 1.9dci) and I got one of the сlїр devices from eBay that lets you edit settings on the ECU and clear errors etc..

My car was working great (finally!) but curiosity got the better of me when looking at the configurations on the сlїр device in the UCH menu. I say something which said 'Type of Power Steering' and it was set to 'basic' but also had the option of 'Variable'. So I selected variable.

When I restarted the car it gave an error about the power steering system so I went back in and reset it to 'basic' and deleted the error code. However it keeps coming back! Despite setting the power steering to basic again there seems to be something left in there looking for the variable power steering hardware. I found a few other menu / pages that refer to it. Error DF102 is the problem.

Can someone help me with how to get this back to normal?!

Hello guys and girls,

just after a little advice here. i own a small garage and have a good knowledge of cars. looking to try remap a few of my own and friends car but just wanted to know what is the best way to go about this? iv just got myself a gallatto 1260 from ebay. is there a remapping for dummies guide? iv noticed that a few people upload files to here?

some advice would be helpful.

Harry

Does anyone know the dtc 105c

it is a renault laguna 2001 2.0 ide

Hi all

Does anyone has manuals for digiprog for chevrolet spark ?

Hello guys!! i have a mercedes 2002 year!W203,C220.i have a power problem sometimes the car can no longer accelerate all the engine is stuck at 3000 tr/mn
when a diagnosis i find this defect
-flow meter"débitmètre"current and memorized
i change the
flow meter"débitmètre"a new
mass air flow sensor it is located on the left side of the engine
and i disassemble my EGR valve for a slagging then i made him egr off!!!!!but the problem was still present.
if anyone knows the problem or met a similar case or !!!!!!!!!?what it is!!somebody there help me please

Please can i have activation RequestID: R569995218 Software Key A9BA-5822-A1C9-B776-EA60-AB86-2901-FF6A-
47F9-377E-AC0C-5737-249C-92A5-541A-2FDF Thank You

Any news and details about latest BMW і5рі-NEXT system?

Need Original Dump for Audi A4 140 CV 2006

Attached Files

Thumbnail(s)
   

How to change gearbox model in ecu from 5 to 6 gears

Help pls with fvdi software with s/n;F08701. OR VERSION WORKABLE WITH ANY HARDWARE

Hello,
I want to tuning file (OM646.963 122hp).

Regards

Attached Files

W203 CDI EDC16C2-7X.zip
File Type:
Downloaded:	33 times
Size:	290.93 KB

Hi I need someone who can and would kill immo from this dump for me please it's Golf mk3 2.8 vr6.

Thank You

Attached Files

0261203568 ori.rar
File Type:
Downloaded:	31 times
Size:	32.71 KB

Hello friends pls someone should help me with a software i can use to repair ecu clash data.

Hello
Recently bought clone Vcd5 12.12.0,installed on win7 32 bit and worked perfect for 4 times,then connected it to audi 2010 and says not registered version...
That notebook is on internet but when not using dїдgиo5тїc.
after last worked session I was on internet ( Vcd5 cable disconnected ) and then when I connected Vcd5 and internet was off,suddenly poped out some window saying there is update for Vcd5,clicked no,after that Vcd5 cable doesnt work
Here are pictures of my interface

Is there possibility to repair this interface,this is second one that is broken...
if there is please tell me which flash cable to buy,if possible usb,because I am not good with soldering...

Thanks people

Attached Files

Vcd5links.txt
File Type:
Downloaded:	102 times
Size:	151 bytes

Does anyone have the ecu open and can take a picture of the PCB?

I need the originale flash of ecu 407 edc16c34 0 281 012 984
ramadane karim

Hello everyone,
maybe it is not directly connected to the forum topic, but I wanted to ask experienced members what tools they use to desolder smd chips on ecu boards, and what would you recommend. Maybe hot air station or IC welding station with infra red heating...

Hello my hard disc die and i need the software to instal on ibm T30 please help me i need version 2011 or 2012 if is possible i have my hard disc prepared to instal mercedes software please help me

thanks

Hello!

i have got Vcd5 12.10.3 and found out that is a clone.
after connection to internet it was dead.

is there any possibility to repair or reflash it?
maybe downgrade to a lower version.

I only found this tut, but it is for the Vcd5 11.

http://obd2motor.wikispaces.com/+China+v...+with+dump

thanks

Does anyone have an old Compact 3 (ADS TEC MPC6015) or Compact 4 to sell ?

Update Diаgвож V7 Allready ратснёd
I also put in the Install iso (from de Master Debutant)
All credits go to Luis-Andre to the ратсн files to update

First un-install old Diаgвож
Installation :
Installing the ISO
you will have version 07.01, you must use this version only for 'manual activation'

After activation, shut duwn Diаgвож and start it up and you will have version 07.02
Ready to Update But use only the of-line updates (otherwise he will be deастїvатёd) and then you must start over again

Use only 32bit windows


Video how to install V7 Already ратснёd And update Windows 7 32bit

Attached Files

Rar and install CODE.txt.txt
File Type:
Downloaded:	3858 times
Size:	185 bytes

Hi everyone,

The password of administrator for the new mux жеитяу Connect is not similarly like Compact4.

Does anybody konw it.

The NTLM Hash of Accountervicing

4B682C589B7BD28A1BCA0B1FBE3F4603

   

With these files you can either replace a dashboard, as one ecu used. severe their archives and sbb runs two chips and ready.

ecu eec vi

Attached Files

Fiesta casal.rar
File Type:
Downloaded:	64 times
Size:	628 bytes

Hi all members Here is the last BMW and MINI TIS DVD that came out in English that I know of, the version is December 2007. Install instructions given on DVD in iso format and when installed you can get repair info specific to a BMW or MINI by entering the last 7 numbers of the VIN number.I do not put any passwords to waste your valuable time waiting for me to answer your PM's.Hope it is of some help to somebody as I could only find the German version and there was a member who asked for a English version.If it helped you a bit please consider some rep and thanks

Attached Files

BMW TIS 12_2007.txt
File Type:
Downloaded:	239 times
Size:	53 bytes

I have a Seat Leon Fr170 TDI and was considering having it chipped but had heard that this can cause problems with the diesel рдятiculate filter-I wondered if anyone has had this done to their VAG car?(I think the engine is the same as the golf GTTDI and skoda octavia VRS)

Repair code fault 0335 position sensor 1 for the cranshaft has an electrical fault

Dear all,

If anyone has experienced and yet found a solution for this issue please advise!

I just bought a pre-owned MB C-Class W203 Petrol Engine (M271.946 - 1.8L Kompressor). The car has 90K KM and I'm experiencing a nightmare with low rpm performance when braking on red light traffic stop / parking the car either on R and D automatic transmission position. Also "Check Engine light" is ON.

In order to find out the issue, just did a SDS Scan and the problem seemed to be "Fuel mixture too rich". Also there was oil leaking in the rear vacuum pump which was repaired, checked vacuum hoses for vacuum leak but nothing came out to cause this issue.
In addition to the above described issues also the front magnetic CAM sensors have oil leaking.

Please advise possible solutions to fїж this issue!

Thank you in advance!
LSD

Attached Files

Low rpms.txt
File Type:
Downloaded:	21 times
Size:	43 bytes

Hi can someone please get me the pin for this dash dump on astra g please many thanks

Attached Files

astra.zip
File Type:
Downloaded:	15 times
Size:	384 bytes

Here is the Installation guide of DAS жеитяу 05.2014 on DELL Latitude D620, etc...

This installation was tested.

If any error, sorry......

Attached Files

Installation guide of DAS жеитяу 05_2014.pdf
File Type:
Downloaded:	538 times
Size:	44.35 KB

Hi guys!

I'm thinking in buying a MB dїдgиo5тїc machine for my garage.

I've seen diferente models, the Mb Star C3,C4, жеитяу, And só on...
Some of then require a specific Dell D630 Laptop.

Whats your advice?

If possible One that support the latest models.

Best regards!


Enviado do meu iPhone usando o Tapatalk

If someone could help I need to change the vin in a W211 0285001544 airbag module. I циLoскёd it with das developer 9/13 but after I do initial setup and put in country of яёgїsтядтїои it gets stuck on data are being determined. I tried to read it with mb commander but it doesn't read the eeprom. If I read the eeprom manually can I edit the vin?

Hello there,
I was wondering if someone could post eeprom dump of instrument cluster (dashboard) for mercedes W906 sprinter year 2009

After changing mileage with Abrites china clone now the dashboard shows lines.

Current tools that i have are:
Abrites commander china clone
Digiprog 3 china clone
Tacho pro 2008
R270
r260
xprog


Thanks in advance.

Attached Files

Thumbnail(s)
   

Hello,please i need pin code for this ecu SAGEM S2000 eeprom 95080

Attached Files

Peugeot 307 95080.rar
File Type:
Downloaded:	54 times
Size:	510 bytes

Hello there,

i have bought cas3 programmer R260 and i am trying to read ezs for mercedes benz w211 chip 3k91d and 0K50E i cannot get it working!!!

could someone please help me with this?

cable wiring is:
pin 1 is empty
pin 2 = yellow
pin 3 = white calibration cable
pin 4 = green
pin 5 = purple
pin 6 = red positive
pin 7 = black negative
pin 8 = silver calibration cable

can someone confirm this?
is this cable pinout correct?

Attached Files

Thumbnail(s)
           
   

Full v2.53.0, 40.35 GB

E36, E38, E39, E46, E52, E53, E60, E65, E70, E83, E85, E89, F001, F010, F020, F025, F056, I001, K1X, K001, K24, KE01, KH2, R50, R56, RR1

-bїшшёяisti

Attached Files

BMW, Mini, Rolls-Royce SP-Daten Full v2.53.0.rar
File Type:
Downloaded:	354 times
Size:	101.97 KB

Hello everybody!
I have bought ELM327 cable for dїдgиo5тїc, but I have trouble connecting it with my Audi A3 8l 1997 1.8. Is it because of the cable, software or problem with the car OBD connector?